Skip to the content
2 layers113 × 43 mm56.8232A, the printed circuit board in 3D

OpenFC Repository for Reproduction PCBs for Early 1980's Famicom Boards. Placeholder: Release Coming Soon!

Size
113 × 43 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
29
Pads
89
Tracks, vias
966, 8
Pours
23
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Jan 2026
Updated
19 May 2026

Overview

56.8232A is an open-source printed circuit board by starlightk7, from the starlightk7/OpenFC repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 113 × 43 mm with 25 parts on 29 nets, routed with 966 tracks and 8 vias.

Its parts include 11 connectors, 6 switches, 2 ICs, 1 capacitor and 1 resistor.

README

README.md

OpenFC

Introduction

This repository contains OSHW Reproduction Parts related to the Famicom (FC) game console under the umbrella name OpenFC.

These parts are freely available under the terms of the CERN-OHL-S license for you to use, study, modify, or sell. The source files are provided as-is with no warranty or entitlement for support to you or any users that you sell manufactured boards to. See LICENSE and NOTICE for details. Please carefully read these files to understand your obligations if you choose to distribute this project or modifications of it.

Sample Build

Usage

Suggested usage for the documents and boards in this repository:

  • Studying the hardware and learning about it's function
  • Aiding repairs and failure diagnostics through the created schematics and boardviews
  • Repairing broken consoles via replacement, reproduction boards and tested replacement BOMs.
  • Building a customized console as a DIY project, for hobby or educational purposes.

Documentation

Please read the documentation carefully before using the project.

You can also watch an HVC install video from 1upRestorations (English)

Getting a Board

The project officially distributes boards from Japan (inexpensive international shipping available), the US and the UK. If you just wish to simply obtain a board for yourself, it will often be cheaper than ordering from the fab directly.

Support is offered to those who purchased a board from a vendor listed below. No support is provided for fabricating these files on your own. If you choose that route, you should understand what you are doing and are responsible for ensuring it is done right. I am not responsible for any defects that may arise from improperly manufacturing these files, or for defects arising from modifications made by you or your PCB fab during manufacturing. If you produce these boards for sale without becoming an authorized distributor, you are responsible for any and all customer support related to the product as well as your compliance with the project's license.

If you have any questions about this, feel free to contact with questions. If you are interested in becoming an authorized distributor for your region, and thus gaining support for your users, please contact me via Discord or Twitter.

The ultimate goal of this project is to eventually document and reproduce all models, but it will take quite some time. If you believe in the long term goal, consider subscribing on Ko-Fi; labor aside, donor boards to research, prototypes, and parts are all expensive, and those funds will help offset those costs to complete more boards.

ko-fi

Feel free to come chat with us on Discord: demo

All boards in this project are ~40 years old at the time of writing. All relevant patents worldwide have long expired. This project is not affiliated with or endorsed by the big N.

Commissions

I do not have time to build commissions on a regular basis, however, there are members of the retro community whom offer this service.

Disclaimer

WARNING: Doing a full build is an advanced project. Please carefully read the documentation and required skills and experience before purchasing or ordering a board. Purchasing boards and parts does not guarantee that you can be successful in doing a build. Significant experience in soldering and desoldering, along with a variety of tools are necessary. Your first build will likely not work on its first boot. Patience, analysis, and debugging will likely be necessary to bring the unit online. Order at your own risk. The author provides no guarantee of your success, and also cannot guarantee that any given vendor can fabricate these boards correctly. If you are ordering boards, please consult with your target vendor before ordering if you wish to order a board.

Parts Index

Motherboards

Part NumberDescriptionRegionStatusJapanUnited StatesUnited Kingdom
HVC-CPU-01AV Famicom / New FamicomNTSC-JNeed DonorN/AN/AN/A
HVC-CPU-02AV Famicom / New FamicomNTSC-JNeed DonorN/AN/AN/A
HVC-CPU-03AV Famicom / New FamicomNTSC-JPlannedN/AN/AN/A
HVC-CPU-04AV Famicom / New FamicomNTSC-JPlannedN/AN/AN/A
HVC-CPU-05AV Famicom / New FamicomNTSC-JPlannedN/AN/AN/A
HVC-CPU-06AV Famicom / New FamicomNTSC-JPlannedN/AN/AN/A
HVC-CPU-07 (1984)The most common HVC motherboard. Most often comes with Rev. E chips.NTSC-JReleasedKo-Fi (Direct), eBay (Direct), Etsy (Direct)1upRestorationsRetroUpgrades
HVC-CPU-GPM-01Redesign that worked on lowering EMI for VCCI complianceNTSC-JPlannedN/AN/AN/A
HVC-CPU-GPM-02Redesign that worked on lowering EMI for VCCI complianceNTSC-JPlannedN/AN/AN/A
HVCN-CPU-01AV Famicom / New FamicomNTSC-JNeed DonorN/AN/AN/A
HVCN-CPU-02AV Famicom / New FamicomNTSC-JIn ProgressN/AN/AN/A

Power AV

Part NumberDescriptionRegionStatusJapanUnited StatesUnited Kingdom
KP-782Early Type Original Power / RF BoardNTSC-JPlannedN/AN/AN/A
KP-917Late Type Original Power / RF BoardNTSC-JIn TestingN/AN/AN/A
OFC-PWRAV-01Original Design. Backport of SFC-style Power/Audio circuit w/ THS7314 for Composite Video.NTSC-JReleasedKo-Fi (Direct), eBay (Direct), Etsy (Direct)1upRestorationsRetroUpgrades

Controllers

Part NumberDescriptionRegionStatusJapanUnited StatesUnited Kingdom
56.8231AFound in Early Circle Button Controllers Pre-NES LaunchNTSC-JPlannedN/AN/AN/A
56.8231BFound in Most Circle Buttton Controllers. Official NES SupportNTSC-J / NTSC-UReleasedKo-Fi (Direct), eBay (Direct), Etsy (Direct)1upRestorationsRetroUpgrades
56.8232ACircle Button Player 2 ControllerNTSC-JReleasedKo-Fi (Direct), eBay(Direct)1upRestorationsRetroUpgrades

Cartridges

There are none currently in progress, but they are planned for future.

Accessories

There are none currently in progress, but they planned for future.

Parts

25
QtyValueFootprintReferences
11+5VOpenFC:P1_WireJ1, J2, J3, J4, J5, J7, J8, J9, J11, J12, J13
2LOGOLOGOG***, G***
10.33ufOpenFC:C_THT_SmallC1
12.2kOpenFC:R_THT_Alt_LongR1
127ohm x8 SOICOpenFC:R_Array_08_SOIC16RN2
140k x6OpenFC:P2_CarbonTracesRN1
1AOpenFC:P1_ABS10
1BOpenFC:P1_ABS9
1DOWNOpenFC:P1_DPadS5
1IC4021OpenFC:IC4021IC1
1LEFTOpenFC:P1_DPadS1
1RIGHTOpenFC:P1_DPadS4
1UPOpenFC:P1_DPadS3
1~OpenFC:MIC_ICIC2

More from starlightk7/OpenFC

4
  • 4 layers89.3 × 50.3 mmOFC PWRAV-01, the printed circuit board in 3D

    OFC PWRAV-01

    starlightk7/OpenFC

    OpenFC Repository for Reproduction PCBs for Early 1980's Famicom Boards. Placeholder: Release Coming Soon!

    66 parts36CERN-OHL-S-2.0
  • 4 layers87.3 × 124.9 mmHVC CPU-07, the printed circuit board in 3D

    HVC CPU-07

    starlightk7/OpenFC

    OpenFC Repository for Reproduction PCBs for Early 1980's Famicom Boards. Placeholder: Release Coming Soon!

    62 parts36CERN-OHL-S-2.0
  • 2 layers113.2 × 43.2 mm56.8231B, the printed circuit board in 3D

    56.8231B

    starlightk7/OpenFC

    OpenFC Repository for Reproduction PCBs for Early 1980's Famicom Boards. Placeholder: Release Coming Soon!

    26 parts36CERN-OHL-S-2.0
  • 2 layers113.2 × 43.2 mm56.8231B, the printed circuit board in 3D

    56.8231B

    starlightk7/OpenFC

    OpenFC Repository for Reproduction PCBs for Early 1980's Famicom Boards. Placeholder: Release Coming Soon!

    26 parts36CERN-OHL-S-2.0

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the 56.8232A PCB?

It measures 113 × 43 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 56.8232A use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 56.8232A KiCad files?

From the starlightk7/OpenFC repository on GitHub, at the commit this page was made from: the board is Controllers/56.8232A/Rev A/56.8232A.kicad_pcb and its schematic Controllers/56.8231B/Rev A/56.8231B.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 56.8232A design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).