

Add paths to your bash/zsh rc for convenience
- Size
- 40 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 40
- Pads
- 144
- Tracks, vias
- 191, 18
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241129)
- Created
- 13 Aug 2024
- Updated
- 18 Dec 2025
Overview
Uvp is an open-source printed circuit board by stanislavstarcha, from the stanislavstarcha/powerbox repository on GitHub. It is a 2-layer board of 40 × 70 mm with 53 parts on 40 nets, routed with 191 tracks and 18 vias.
It is built around the SN74LVC2G04DBVR and NE555D. Its parts include 23 resistors, 9 capacitors, 7 ICs, 5 transistors and 2 diodes.
Main components
2README
README.mdInstall and run firmware
Add paths to your bash/zsh rc for convenience
export POWERBOX_HOME=$HOME/powerbox
export LVGL_HOME=$HOME/lvgl_micropythonmkdir $POWERBOX_HOME
cd $POWERBOX_HOME
git clone https://github.com/stanislavstarcha/powerbox .Install LVGL micropython
mkdir $LVGL_HOME
cd $LVGL_HOME
git clone https://github.com/lvgl-micropython/lvgl_micropython .Copy fonts
cd $POWEBOX_HOME
cp ./resources/fonts/Roboto-Black.ttf $LVGL_HOME/lib/lvgl/scripts/built_in_font
cp ./resources/fonts/Roboto-Regular.ttf $LVGL_HOME/lib/lvgl/scripts/built_in_font
cp ./resources/fonts/Material-Sharp-28.ttf $LVGL_HOME/lib/lvgl/scripts/built_in_fontBuild fonts
Modify $LVGL_HOME/lib/lvgl/scripts/built_in_font/generate_all.py and add
print("\nGenerating 12 px Roboto Ukrainian")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 12 --font Roboto-Regular.ttf --format lvgl -o lv_font_roboto_12.c -r 0xB0,0x20-0x22,0x25,0x27-0x40,0x5B-0x5F,0x7B-0x7D,0xA0,0xA7,0xA9,0xAB,0xBB,0x2BC,0x404,0x406-0x407,0x410-0x429,0x42C,0x42E-0x449,0x44C,0x44E-0x44F,0x454,0x456-0x457,0x490-0x491,0x2011,0x2013,0x2019,0x201C,0x201E,0x2030,0x20AC,0x2116")
print("\nGenerating 24 px Glyphs")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 24 --font Material-Sharp-28.ttf --format lvgl -o lv_font_material_24.c -r 0xEAC3,0xEAC9,0xEAD0,0xEACF,0xE000,0xe1a7,0xe1a8,0xf156,0xE7EE,0xe5d3,0xe322,0xe87d")
print("\nGenerating 24 px Roboto")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 26 --font Roboto-Black.ttf --format lvgl -o lv_font_roboto_24.c -r 0x20,0x30-0x39,0x412,0x442")
print("\nGenerating 120 px Roboto")
os.system("lv_font_conv --no-compress --no-prefilter --bpp 2 --size 120 --font Roboto-Black.ttf --format lvgl -o lv_font_roboto_120.c --symbols 0123456789%")and then build the fonts
cd $LVGL_HOME/lib/lvgl/scripts/built_in_font
python generate_all.pyModify headers
Open $LVGL_HOME/lib/lvconf.h
Set to 0 (disable) all #define LV_FONT_MONTSERRAT_*
and define custom fonts built earlier.
#define LV_FONT_MONTSERRAT_14 0
...
#define LV_FONT_CUSTOM_DECLARE LV_FONT_DECLARE(lv_font_roboto_12) LV_FONT_DECLARE(lv_font_roboto_24) LV_FONT_DECLARE(lv_font_roboto_120) LV_FONT_DECLARE(lv_font_material_24)
#define LV_FONT_DEFAULT &lv_font_roboto_12Build firmware
cd $LVGL_HOME
python make.py esp32 BOARD=ESP32_GENERIC_S3 DISPLAY=ILI9488 \
FROZEN_MANIFEST=$POWERBOX_HOME/manifest.py BOARD_VARIANT=SPIRAM_OCT \
--flash-size=16 \
--otaFlash firmware
Connect ESP32-S3 to USB and find the port ls /dev/tty*
A typical serial port should look like this
/dev/tty.usbmodem11101/dev/cu.usbserial-0001/dev/tty.usbmodem1234561
Note: On MacOS you may need a CH34xVCPDriver that would create a new port like
/dev/tty.wchusbserial59710258441
cd $LVGL_HOME
python -m esptool --chip esp32s3 -p /dev/tty.wchusbserial59710258441 \
-b 460800 --before default_reset --after hard_reset write_flash \
--flash_mode dio --flash_size 16MB --flash_freq 80m --erase-all \
0x0 /Users/stasstarcha/workspace/lvgl_micropython/build/lvgl_micropy_ESP32_GENERIC_S3-SPIRAM_OCT-16.binBuild release
Specify the version and run the command to produce bin and json files that should be attached to a release on GitHub.
cd $POWEBOX_HOME
python scripts/release.py --version=0.10.0 \
--path=$LVGL_HOME/lib/micropython/ports/esp32/build-ESP32_GENERIC_S3-SPIRAM_OCT/micropython.bin \
--output=../buildDevelopment mode
During development, it's easier to update files one by one.
python initialize.py \
--baud_rate 115200 \
--port /dev/cu.usbserial-0001Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R8, R10, R12, R14, R20 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R11, R13, R18, R19 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric | R21, R22, R23, R24 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 3 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R9, R17 |
| 3 | 500k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R15, R16 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6 |
| 2 | 1u | Capacitor_SMD:C_1210_3225Metric | C8, C9 |
| 2 | D_Zener | Diode_THT:D_5W_P12.70mm_Horizontal | D1, D2 |
| 2 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6 |
| 2 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 2 | PMOS 9301 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5 |
| 2 | TL331 | Package_TO_SOT_SMD:SOT-23-5 | U3, U7 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-063_Horizontal | RV1 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C5 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 270k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | FAN1 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | IN1 |
| 1 | FAN2 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | IN3 |
| 1 | IN | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | INV FAN1 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | IN2 |
| 1 | INV FAN2 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | IN4 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U8 |
| 1 | LOAD | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | PMOS | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | REF3025 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | SN74LVC2G04DBVR | SN74LVC2G04DBVR:SOT95P280X145-6N | U4 |
More from stanislavstarcha/powerbox
3Similar boards
- 4 layers90 × 66 mm

ChassisBoard
SolarEnergyRacers/solar_car_control_system_v6
solarenergyracers.ch - control system (AC, DC, MC), Documents
71 parts - 2 layers100 × 100 mm

Zxevo1010 main
UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
252 parts26 - 2 layers100 × 100 mm

Zxuno1010
UzixLS/zxuno1010-board
10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure
233 parts23MIT - 2 layers99.9 × 43.2 mm

- 4 layers57 × 27 mm

- 2 layers98 × 60 mm

- 4 layers63.5 × 63.5 mm

IMU-2X
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
125 parts3Apache-2.0 - 6 layers220 × 100 mm

Motion card placement
DeadlySIn777/Controller
Unfinished CNC controller motherboard: native KiCad sources, rules, DSN and global routing review
203 parts
Questions
How big is the Uvp PCB?
It measures 40 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Uvp use?
53 parts, built around the SN74LVC2G04DBVR and NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Uvp KiCad files?
From the stanislavstarcha/powerbox repository on GitHub, at the commit this page was made from: the board is resources/pcba/uvp/uvp.kicad_pcb and its schematic resources/pcba/booster/booster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Uvp design in my own project?
Its repository states no licence, so its author keeps all rights: ask stanislavstarcha before reusing the design.

