stanford-ssi/sapling-avionics2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage -…
Batteryboard is an open-source printed circuit board by stanford-ssi, from the stanford-ssi/sapling-avionics repository on GitHub. It is a 2-layer board of 95.9 × 90.2 mm with 27 parts on 12 nets, routed with 54 tracks and 52 vias.
It is built around the IRF7458. Its parts include 9 connectors, 4 capacitors, 4 resistors, 2 transistors and 1 IC.
2S3P Li-ion battery pack for CubeSat designs.
Tested against the following flight requirement documents: (the cells you use play a big role here)
This board is merely a starting point for your spacecraft. Always follow the requirements set forth by your launch provider and integrator.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | KEYSTONE-1042 | batteryboard:Keystone_1042 | J1, J2, J3, J4, J5, J6 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | MountingHole_Pad | custom-footprints:MountingHole_3.2mm_M3_DIN965_PadMOD | H1, H2, H3, H4 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | IRF7458 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 2 | Screw_Terminal_01x02 | batteryboard:pheonix_2pos_screwterminal | J8, J12 |
| 2 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2 |
| 1 | 0.01 | Resistor_SMD:R_2512_6332Metric | R3 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 5023520400 | batteryboard:duraclik_4pos | J7 |
| 1 | R5460N233AF | custom-footprints:SOT95P280X130-6N | U1 |
| 1 | Thermistor | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | TH1 |
stanford-ssi/sapling-avionics
2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage -…
stanford-ssi/sapling-avionics
2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage -…
stanford-ssi/sapling-avionics
2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage -…
hsfl/artemis-hardware
Hardware design resources for the Artemis Kit, an affordable 1U CubeSat that encompasses all the essential subsystems of a fully operational passive small satellite, commonly known as a smallsat.
proveskit/battery_board
The battery and power management board for the PROVES Kit.
proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.
pleiades-cluster/yearling-battery-board
Modified BroncoSat-1 battery board for PROVES Yearling
alxklso/ISP-cubesat
This is the repo for the Isomer Space Program (ISP) 1U CoyoteSat CubeSat mission.
It measures 95.9 × 90.2 mm and has 2 copper layers, 1.57 mm thick.
27 parts, built around the IRF7458. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stanford-ssi/sapling-avionics repository on GitHub, at the commit this page was made from: the board is BatteryBoard/batteryboard-v01c/batteryboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask stanford-ssi before reusing the design.
