2 layers45.1 × 20.1 mm
Circuit board design
ImperialSpaceSociety/picotracker-Lora
This is the code base and hardware design files for the Lora pico tracker to be flown around the world
55 parts14
2 layers15 × 30 mm
SS@H001
SSatH/SSatH- Size
- 15 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 37
- Pads
- 174
- Tracks, vias
- 408, 45
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 10 Aug 2015
- Updated
- 10 Aug 2015
Overview
SS@H001 is an open-source printed circuit board by SSatH, from the SSatH/SSatH repository on GitHub. It is a 2-layer board of 15 × 30 mm with 35 parts on 37 nets, routed with 408 tracks and 45 vias.
It is built around the TPS62740DSS and MMBF170. Its parts include 10 resistors, 8 capacitors, 6 connectors, 3 ICs and 1 transistor.
Main components
2README
README.mdSSatH
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | JUMPER-3 | JUMPER-3C | JP2, JP3, JP4, JP5 |
| 3 | 100nF | 0402 | C2, C4, C5 |
| 3 | 10k | 0402 | R1, R2, R22 |
| 3 | 10uF | 0603 | C1, C8, C9 |
| 2 | 200k | 0402 | R15, R16 |
| 2 | CONN_10 | 10x1-1.27mm-Tht | P3, P4 |
| 1 | 0 | 0402 | R12 |
| 1 | 100k | 0402 | R5 |
| 1 | 10uF | 0402 | C6 |
| 1 | 1M | 0402 | R18 |
| 1 | 1uF | 0402 | C3 |
| 1 | 2.2uH | 0805 | L1 |
| 1 | 3.9k | 0402 | R3 |
| 1 | 32.768KHZ | Qtc2 | X1 |
| 1 | 4.7k | 0402 | R4 |
| 1 | BATT | 2x1-1.27mm-Tht | P6 |
| 1 | CONN_7 | 7x1-1.27mm-Tht | P5 |
| 1 | KL03 | Qfn-24 | U2 |
| 1 | LTC4067 | Dfn-12 | U1 |
| 1 | MICRO-USB | MICRO-USB-B | P1 |
| 1 | MMBF170 | SOT23 | Q1 |
| 1 | OSHW-logo_silkscreen-front_3mm | OSHW-logo_silkscreen-front_3mm | G*** |
| 1 | SWD | 5x2-1.27mm-Tht | P2 |
| 1 | TPS62740 | Wson-12 | U3 |
Questions
How big is the SS@H001 PCB?
It measures 15 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SS@H001 use?
35 parts, built around the TPS62740DSS and MMBF170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SS@H001 KiCad files?
From the SSatH/SSatH repository on GitHub, at the commit this page was made from: the board is 04-Layout/SS@H001/SS@H001-0/SS@H001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SS@H001 design in my own project?
Its repository states no licence, so its author keeps all rights: ask SSatH before reusing the design.
Similar boards
- 2 layers22 × 28 mm
- 4 layers85 × 52 mm
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
24 parts - 2 layers14 × 14 mm
Try2
SKGleba/psp2sdboot
Tools and guides for achieving code execution in Playstation Vita/TV BootROM's "SD boot mode"
10 parts51MIT - 2 layers72 × 22 mm
Cheating calc
ChinesePrince07/TI-84-GPT-HACK
A mod that gives your TI-84 Wi-Fi, ChatGPT, and the ability to disappoint your math teacher in ways never thought possible. Original idea by Chromalock, reconstructed by myself after his repo is taken down.
8 parts9GPL-3.0 - 6 layers44 × 118 mm
3210retro test
DasBasti/NokiaRetroFit
Retrofitting a Nokia 3210 with modern Processor
195 parts9Apache-2.0 - 2 layers114 × 89 mm
- 6 layers105 × 70 mm
