2 layers56.5 × 52.7 mm
2 layers71 × 74 mm
Particle sensor pcb
squishykid/particlesParticulate Matter Sensor Device
- Size
- 71 × 74 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 48
- Pads
- 134
- Tracks, vias
- 159, 22
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Jan 2022
- Updated
- 20 May 2023
Overview
Particle sensor pcb is an open-source printed circuit board by squishykid, from the squishykid/particles repository on GitHub. It is a 2-layer board of 71 × 74 mm with 46 parts on 48 nets, routed with 159 tracks and 22 vias.
It is built around the ESP-12F, PMS7003M and DHT11, with the AMS1117-3.3 among its other parts. Its parts include 9 resistors, 8 capacitors, 4 ICs and 4 connectors. It belongs with the sensors and measurement and home automation and IoT boards and the ESP8266 boards of this library.
Main components
4
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesPMS7003M
-- Sensor Modules ROHSBeijing PlantowerSensor Modules
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdParticulate and Environment Sensor
ESP8266 and ESPHome based sensor unit
Sensors
- PMS7003 Particulate Sensor (including PM2.5)
- SenseAir S8
Directories
particle_sensor_pcb- CAD files for pcbsrc- ESPHome config/code
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 12K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R7, R8, R9 |
| 6 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5, C6, C7, C8 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 1 | 004-0-0053 | sensor:Senseair_S8_Up | U2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 1 | DST_JUMP | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | ESP-12F | RF_Module:ESP-12E | U4 |
| 1 | PMS7003 | Connector_PinSocket_1.27mm:PinSocket_2x05_P1.27mm_Vertical | J3 |
| 1 | SRC_JUMP | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | USB_C_ | lib:TYPE-C-31-M-17_handsolder | P1 |
The 25 most common of 46 parts.
Questions
How big is the Particle sensor pcb PCB?
It measures 71 × 74 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Particle sensor pcb use?
46 parts, built around the ESP-12F, PMS7003M, DHT11 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Particle sensor pcb KiCad files?
From the squishykid/particles repository on GitHub, at the commit this page was made from: the board is particle_sensor_pcb/particle_sensor_pcb.kicad_pcb and its schematic particle_sensor_pcb/particle_sensor_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Particle sensor pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask squishykid before reusing the design.
Similar boards
- 2 layers60 × 112 mm
Pmco kicad
sugaat/low-cost-aqi-monitor
esp32 based aqi monitor for pm, co, temperature and humidity
8 parts - 2 layers52.8 × 71.4 mm
- 2 layers162 × 60 mm
Air detector
shm-dmitry/air-detector
Air status sensor with hass integration and fan control
132 partsApache-2.0 - 2 layers109.9 × 105.6 mm
ClimateController
Pablo-Ortiz-Lopez/ClimateController
ESP8266 based device which handles the climate of a room.
23 parts - 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers99.9 × 99.9 mm
- 4 layers127 × 46 mm
Motherboard
KhazAkar/espws
[MOVED to GitLab: https://gitlab.com//r3xxar/espws] Weather station firmware for ESP8266 - mirror
116 parts4MIT