
Module CH224K USB C PD sink tiled
Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.
Soft latching module V001 is an open-source printed circuit board by Squantor, from the Squantor/various_PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 27 × 17.9 mm with 18 parts on 12 nets, routed with 88 tracks and 14 vias.
It is built around the BSS138. Its parts include 6 resistors, 3 diodes, 3 connectors, 2 transistors and 1 capacitor. It belongs with the interfaces and adapters boards of this library.
RGB WS2812B style neopixel
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | SquantorRcl:R_0603_hand | R1, R4, R5 |
| 2 | LED | SquantorDiodes:LED_0603_hand | D2, D3 |
| 1 | 100K | SquantorRcl:R_0603_hand | R3 |
| 1 | 100k | SquantorRcl:R_0603_hand | R2 |
| 1 | 10n | SquantorRcl:C_0603 | C1 |
| 1 | 20190709 | SquantorLabels:Label_version | N2 |
| 1 | 2pin_tact_switch | SquantorButtons:DTSM3 | S1 |
| 1 | BSS138 | SquantorIC:SOT23-3 | Q1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | D_Schottky_x2_KCom_AAK | SquantorIC:SOT23-3 | D1 |
| 1 | DevBoardUartInput | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1 |
| 1 | DevBoardUartOutput | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J3 |
| 1 | FUSE | SquantorRcl:R_0603_hand | R6 |
| 1 | OHWLOGO | Symbols:OSHW-Symbol_6.7x6mm_SilkScreen | N1 |
| 1 | Q_PMOS_GSD | SquantorIC:SOT23-3 | Q2 |

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.
Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.
Squantor/various_PCB
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.

StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

It measures 27 × 17.9 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Squantor/various_PCB repository on GitHub, at the commit this page was made from: the board is electronics/soft_latching_module_V001/soft_latching_module_V001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).