Skip to the content
2 layers17.2 × 14.6 mmPassive filter, the printed circuit board in 3D

Passive filter

Squantor/Metrology

General Metrology related repository, Schematics, PCB, Measurement results and more.

Size
17.2 × 14.6 mm
Copper layers
2
Thickness
1.67 mm
Parts
10
Nets
4
Pads
20
Tracks, vias
9, 19
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
19 Mar 2015
Updated
30 May 2024

Overview

Passive filter is an open-source printed circuit board by Squantor, from the Squantor/Metrology repository on GitHub, published under the MIT licence. It is a 2-layer board of 17.2 × 14.6 mm with 10 parts on 4 nets, routed with 9 tracks and 19 vias.

Its parts include 4 resistors, 2 capacitors and 2 connectors.

README

electronics/dslogic_probe_8/README.md

8 channel dslogic probe tip

8 channel logic analyser probe tip designed for the DSlogic logic analyzer

TODO's

Still some things need to be done:

  • PCB layout
  • Review with one night in between
  • Produce at OSHPARK
  • Assemble
  • Test & characterise
  • update Readme.md with pictures and BOM

BOM

  • 82 pin 1.27mm pinheader and 82 pin female 1.27mm pinheader

Parts

10
QtyValueFootprintReferences
4RSquantorResistor:R_0805+0603R1, R2, R3, R4
2CSquantorCapacitor:C_0402+0603+0805+THC1, C2
2CoaxSquantorConnectors:coax_edge_1.5_center_5_sideJ1, J2
120231214SquantorLabels:Label_GenericN1
1OHWLOGOSymbol:OSHW-Symbol_6.7x6mm_SilkScreenN2

More from Squantor/Metrology

12
  • 2 layers42.5 × 46.2 mmOscillator variant 2, the printed circuit board in 3D

    Oscillator variant 2

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    56 partsMIT
  • 2 layers42.5 × 46.2 mmOscillator proto V1, the printed circuit board in 3D

    Oscillator proto V1

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    48 partsMIT
  • 2 layers42.4 × 46.2 mmNotch filter, the printed circuit board in 3D

    Notch filter

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    33 partsMIT
  • 2 layers11.5 × 11.2 mmDslogic probe 8, the printed circuit board in 3D

    Dslogic probe 8

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    27 partsMIT
  • 2 layers43.2 × 49.5 mmModEleSysV2 wien oscillator VLT1, the printed circuit board in 3D

    ModEleSysV2 wien oscillator VLT1

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    25 partsMIT
  • 2 layers40 × 22 mmFlatcable jig endpoint, the printed circuit board in 3D

    Flatcable jig endpoint

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    20 partsMIT
  • 2 layers20.8 × 15.7 mmMCP355X module, the printed circuit board in 3D

    MCP355X module

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    20 partsMIT
  • 2 layers11.3 × 6.4 mmDslogic probe 4, the printed circuit board in 3D

    Dslogic probe 4

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    15 partsMIT
  • 2 layers25.4 × 20.3 mmREF50XX module, the printed circuit board in 3D

    REF50XX module

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    14 partsMIT
  • 2 layers17 × 28.8 mmBypass capacitor tester, the printed circuit board in 3D

    Bypass capacitor tester

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    13 partsMIT
  • 4 layers40 × 30 mmBreakout S4N33C013, the printed circuit board in 3D

    Breakout S4N33C013

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    12 partsMIT
  • 2 layers36 × 16 mmTerminator module, the printed circuit board in 3D

    Terminator module

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    8 partsMIT

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0

Questions

How big is the Passive filter PCB?

It measures 17.2 × 14.6 mm and has 2 copper layers, 1.67 mm thick.

What parts does the Passive filter use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Passive filter KiCad files?

From the Squantor/Metrology repository on GitHub, at the commit this page was made from: the board is electronics/passive_filter/passive_filter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Passive filter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).