Skip to the content
2 layers42.4 × 46.2 mmNotch filter, the printed circuit board in 3D

Notch filter

Squantor/Metrology

General Metrology related repository, Schematics, PCB, Measurement results and more.

Size
42.4 × 46.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
48
Pads
140
Tracks, vias
99, 7
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
19 Mar 2015
Updated
30 May 2024

Overview

Notch filter is an open-source printed circuit board by Squantor, from the Squantor/Metrology repository on GitHub, published under the MIT licence. It is a 2-layer board of 42.4 × 46.2 mm with 33 parts on 48 nets, routed with 99 tracks and 7 vias.

Its parts include 16 resistors, 6 capacitors, 6 connectors and 1 IC.

README

electronics/dslogic_probe_8/README.md

8 channel dslogic probe tip

8 channel logic analyser probe tip designed for the DSlogic logic analyzer

TODO's

Still some things need to be done:

  • PCB layout
  • Review with one night in between
  • Produce at OSHPARK
  • Assemble
  • Test & characterise
  • update Readme.md with pictures and BOM

BOM

  • 82 pin 1.27mm pinheader and 82 pin female 1.27mm pinheader

Parts

33
QtyValueFootprintReferences
4DSquantorRcl:C-050-050X100-0805-3516-filmC2, C3, C4, C5
21.2KSquantorRcl:R_0805+0603R3, R4
2ASquantorRcl:R_0805+0603R7, R10
2BSquantorRcl:R_0805+0603R8, R11
2CSquantorRcl:R_0805+0603R13, R15
2Conn_01x03Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ1, J2
2EPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1, RV2
110SquantorRcl:R_0805+0603R6
1100SquantorRcl:R_0805+0603R1
110KSquantorRcl:R_0805+0603R2
11MSquantorRcl:R_0805+0603R16
11uFSquantorRcl:C_0805+0603C1
120230717SquantorLabels:Label_GenericN1
133KSquantorRcl:R_0805+0603R5
1A/2SquantorRcl:R_0805+0603R14
1B/2SquantorRcl:R_0805+0603R9
1C/2SquantorRcl:R_0805+0603R12
1InSquantorConnectors:Conn_BNC_RightAngle_THJ4
1OHWLOGOSymbol:OSHW-Symbol_6.7x6mm_SilkScreenN2
1OutputSquantorConnectors:Conn_BNC_RightAngle_THJ3
1compSquantorRcl:C_0805+0603C6
1module_2x15_left_inputConnector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_VerticalJ5
1module_2x15_right_inputConnector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_VerticalJ6
1opamp_single_8pinPackage_DIP:DIP-8_W7.62mm_SocketU1

More from Squantor/Metrology

12
  • 2 layers42.5 × 46.2 mmOscillator variant 2, the printed circuit board in 3D

    Oscillator variant 2

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    56 partsMIT
  • 2 layers42.5 × 46.2 mmOscillator proto V1, the printed circuit board in 3D

    Oscillator proto V1

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    48 partsMIT
  • 2 layers11.5 × 11.2 mmDslogic probe 8, the printed circuit board in 3D

    Dslogic probe 8

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    27 partsMIT
  • 2 layers43.2 × 49.5 mmModEleSysV2 wien oscillator VLT1, the printed circuit board in 3D

    ModEleSysV2 wien oscillator VLT1

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    25 partsMIT
  • 2 layers40 × 22 mmFlatcable jig endpoint, the printed circuit board in 3D

    Flatcable jig endpoint

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    20 partsMIT
  • 2 layers20.8 × 15.7 mmMCP355X module, the printed circuit board in 3D

    MCP355X module

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    20 partsMIT
  • 2 layers11.3 × 6.4 mmDslogic probe 4, the printed circuit board in 3D

    Dslogic probe 4

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    15 partsMIT
  • 2 layers25.4 × 20.3 mmREF50XX module, the printed circuit board in 3D

    REF50XX module

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    14 partsMIT
  • 2 layers17 × 28.8 mmBypass capacitor tester, the printed circuit board in 3D

    Bypass capacitor tester

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    13 partsMIT
  • 4 layers40 × 30 mmBreakout S4N33C013, the printed circuit board in 3D

    Breakout S4N33C013

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    12 partsMIT
  • 2 layers17.2 × 14.6 mmPassive filter, the printed circuit board in 3D

    Passive filter

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    10 partsMIT
  • 2 layers36 × 16 mmTerminator module, the printed circuit board in 3D

    Terminator module

    Squantor/Metrology

    General Metrology related repository, Schematics, PCB, Measurement results and more.

    8 partsMIT

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the Notch filter PCB?

It measures 42.4 × 46.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Notch filter use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Notch filter KiCad files?

From the Squantor/Metrology repository on GitHub, at the commit this page was made from: the board is electronics/notch_filter/notch_filter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Notch filter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).