
Oscillator variant 2
Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

General Metrology related repository, Schematics, PCB, Measurement results and more.
Flatcable jig endpoint is an open-source printed circuit board by Squantor, from the Squantor/Metrology repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 22 mm with 20 parts on 10 nets, routed with 74 tracks and 6 vias.
Its parts include 9 resistors, 4 connectors and 2 capacitors.
8 channel logic analyser probe tip designed for the DSlogic logic analyzer
Still some things need to be done:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | R | SquantorRcl:R_0603_hand | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 3 | SolderJumper_2way_1conn | SquantorSpecial:solder_jumper_2way_conn | SJ1, SJ2, SJ3 |
| 2 | C | SquantorRcl:C_0805 | C1, C2 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | 20190121 | SquantorLabels:Label_version | N2 |
| 1 | Coax | SquantorConnectors:Conn_BNC_RightAngle_TH | J1 |
| 1 | Conn_02x05_Odd_Even | SquantorConnectors:Header-0254-2X05-H010 | J5 |
| 1 | OHWLOGO | Symbols:OSHW-Symbol_6.7x6mm_SilkScreen | N1 |

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.

Squantor/Metrology
General Metrology related repository, Schematics, PCB, Measurement results and more.



atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
It measures 40 × 22 mm and has 2 copper layers, 1.6 mm thick.
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Squantor/Metrology repository on GitHub, at the commit this page was made from: the board is electronics/flatcable_jig_endpoint/flatcable_jig_endpoint.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).