SPROJ1Group5/finalPCBSPROJ1 G5 MultiM V2 is an open-source printed circuit board by SPROJ1Group5, from the SPROJ1Group5/finalPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 110 × 110 mm with 88 parts on 76 nets, routed with 430 tracks and 137 vias.
It is built around the LMV358, L7805 and IRLML6401, with the FCR7350R among its other parts. Its parts include 37 resistors, 17 capacitors, 9 transistors, 6 ICs and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R11, R14, R15, R17, R20, R32, R34, R36 |
| 8 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R10, R13, R16, R19, R33, R35, R37 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C9, C14, C17 |
| 5 | IRLML6401 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C15 |
| 4 | NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q6, Q7, Q8, Q9 |
| 3 | 15K | Resistor_SMD:R_0805_2012Metric | R1, R3, R4 |
| 3 | FCR7350R | FCR7350R:FCR7350 | J2, J3, J4 |
| 3 | HFD4/005 | Homemade_foot:HFD4 | K1, K2, K3 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R5, R30 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 2 | 15K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R26 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R31 |
| 2 | 5K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R25 |
| 2 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 2 | SW_Omron_B3FS | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R24 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 220n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 30K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 330n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 50 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 6.8n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 7414 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | 9V Battery | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J1 |
| 1 | ACS723xLCTR-05AB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J6 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U5 |
| 1 | LM35-DZ | Package_TO_SOT_THT:TO-92 | U6 |
| 1 | Switch | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J5 |
| 1 | Zener 5V | Package_TO_SOT_SMD:SOT-23-3 | D2 |
The 84 most common of 88 parts.
It measures 110 × 110 mm and has 2 copper layers, 1.6 mm thick.
88 parts, built around the LMV358, L7805, IRLML6401 and FCR7350R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SPROJ1Group5/finalPCB repository on GitHub, at the commit this page was made from: the board is SPROJ1_G5_MultiM_V2.kicad_pcb and its schematic SPROJ1_G5_MultiM_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Amodo-Design/PSRR-Injector-Board
Board to allow you to measure power supply rejection ratio. Allows you to inject an AC ripple on top of your DC power supply to measure downstream. 0dB from 100Hz+.
louisonmalinge/Projet-Velux
Dans ce Git, vous trouverez les fichiers ayant permis de réaliser le projet Velux, avec ses différentes versions.
ephemeridis/GRBL_board
This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!