

Magic-27
Magic 27 is a aula f75 style keyboard designed completely from scrartch. It uses marbastlib, akko creamy blue switches, and 3d printed case.
- Size
- 343.5 × 143 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 170
- Nets
- 114
- Pads
- 624
- Tracks, vias
- 456, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Jun 2026
- Updated
- 17 Jun 2026
Overview
Magic-27 is an open-source printed circuit board by SPJ27, from the SPJ27/magic-27-keyboard repository on GitHub. It is a 2-layer board of 343.5 × 143 mm with 170 parts on 114 nets, routed with 456 tracks and 0 vias.
Its parts include 81 switches and 80 diodes. It belongs with the RP2040 boards of this library.
README
README.mdMagic 27
Magic 27 is a aula f75 style keyboard designed completely from scrartch. It uses marbastlib, akko creamy blue switches, and 3d printed case. I am building this because I wanted to make my own keyboard rather than buying premade ones. From this project, I learned skills such as cad designing, pcb designing, and a lot about mechanical keyboards.
Journal 5: ~3hrs
Completed the project! I designed the case, and also added the 3d models for different keys. Designing the case took a lot of time, and i have only designed the bottom holder for now. In, future, I will make the top cover if needed.
Journal 5: ~1hr 30mins
Routed all of the paths, fixed some errors, and the pcb is ready. I had to reroute twice cause the paths were colliding. Routing had taken a lot of time, because I had to connect each of them individually.
Journal 4: ~1hr 30mins
Added all of diodes - it was extremely time consuming as I had to place them individually. Also, I have started making the basic routes.
Journal 3: ~1hr
So I remade the pcb as it got corrupted the last time. This time it took way less time as compared to the previous version as I already knew things that i should have done earlier - for example i should have named the components by there key for easier positioning and whatnot.
Journal 2: ~3hrs 30mins
I switched from kicad 8.0 to kicad 10, so my original work with pcb is now showing as corrupted when I woke up this morning. I have a few screenshots of prev versions.
Journal 1: ~1hr 50mins
Created the basic pcb - will now rearrange and rename all of the switches, and then arrange all of them in pcb editor.
Parts
170| Qty | Value | Footprint | References |
|---|---|---|---|
| 80 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +64 |
| 4 | MountingHole | MountingHole:ToolingHole_1.152mm | H1, H2, H3, H4 |
| 3 | SW_Push | PCM_marbastlib-mx:SW_MX_1u | SW78, SW79, SW80 |
| 2 | CTRL | PCM_marbastlib-mx:SW_MX_1.25u | SW73, SW77 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_2u | S6, S7 |
| 1 | ' | PCM_marbastlib-mx:SW_MX_1u | SW55 |
| 1 | + | PCM_marbastlib-mx:SW_MX_1u | SW26 |
| 1 | , | PCM_marbastlib-mx:SW_MX_1u | SW66 |
| 1 | - | PCM_marbastlib-mx:SW_MX_1u | SW25 |
| 1 | . | PCM_marbastlib-mx:SW_MX_1u | SW67 |
| 1 | 0 | PCM_marbastlib-mx:SW_MX_1u | SW24 |
| 1 | 1 | PCM_marbastlib-mx:SW_MX_1u | SW15 |
| 1 | 2 | PCM_marbastlib-mx:SW_MX_1u | SW16 |
| 1 | 3 | PCM_marbastlib-mx:SW_MX_1u | SW17 |
| 1 | 4 | PCM_marbastlib-mx:SW_MX_1u | SW18 |
| 1 | 5 | PCM_marbastlib-mx:SW_MX_1u | SW19 |
| 1 | 6 | PCM_marbastlib-mx:SW_MX_1u | SW20 |
| 1 | 7 | PCM_marbastlib-mx:SW_MX_1u | SW21 |
| 1 | 8 | PCM_marbastlib-mx:SW_MX_1u | SW22 |
| 1 | 9 | PCM_marbastlib-mx:SW_MX_1u | SW23 |
| 1 | ; | PCM_marbastlib-mx:SW_MX_1u | SW54 |
| 1 | ? | PCM_marbastlib-mx:SW_MX_1u | SW68 |
| 1 | A | PCM_marbastlib-mx:SW_MX_1u | SW45 |
| 1 | ALT | PCM_marbastlib-mx:SW_MX_1.25u | SW75 |
| 1 | ArrowUp | PCM_marbastlib-mx:SW_MX_1u | SW70 |
| 1 | B | PCM_marbastlib-mx:SW_MX_1u | SW63 |
| 1 | BACKSPACE | PCM_marbastlib-mx:SW_MX_1u | SW27 |
| 1 | BackspaceStab | PCM_marbastlib-mx:STAB_MX_2u | S1 |
| 1 | C | PCM_marbastlib-mx:SW_MX_1u | SW61 |
| 1 | CapsLock | PCM_marbastlib-mx:SW_MX_1.75u | SW44 |
| 1 | D | PCM_marbastlib-mx:SW_MX_1u | SW47 |
| 1 | Del | PCM_marbastlib-mx:SW_MX_1u | SW28 |
| 1 | E | PCM_marbastlib-mx:SW_MX_1u | SW32 |
| 1 | ESC | PCM_marbastlib-mx:SW_MX_1u | SW1 |
| 1 | End | PCM_marbastlib-mx:SW_MX_1u | SW71 |
| 1 | Enter | PCM_marbastlib-mx:SW_MX_1u | SW56 |
| 1 | F | PCM_marbastlib-mx:SW_MX_1u | SW48 |
| 1 | F1 | PCM_marbastlib-mx:SW_MX_1u | SW2 |
| 1 | F10 | PCM_marbastlib-mx:SW_MX_1u | SW11 |
| 1 | F11 | PCM_marbastlib-mx:SW_MX_1u | SW12 |
| 1 | F12 | PCM_marbastlib-mx:SW_MX_1u | SW13 |
| 1 | F2 | PCM_marbastlib-mx:SW_MX_1u | SW3 |
| 1 | F3 | PCM_marbastlib-mx:SW_MX_1u | SW4 |
| 1 | F4 | PCM_marbastlib-mx:SW_MX_1u | SW5 |
| 1 | F5 | PCM_marbastlib-mx:SW_MX_1u | SW6 |
| 1 | F6 | PCM_marbastlib-mx:SW_MX_1u | SW7 |
| 1 | F7 | PCM_marbastlib-mx:SW_MX_1u | SW8 |
| 1 | F8 | PCM_marbastlib-mx:SW_MX_1u | SW9 |
| 1 | F9 | PCM_marbastlib-mx:SW_MX_1u | SW10 |
| 1 | FN | PCM_marbastlib-mx:SW_MX_1.25u | SW76 |
| 1 | G | PCM_marbastlib-mx:SW_MX_1u | SW49 |
| 1 | H | PCM_marbastlib-mx:SW_MX_1u | SW50 |
| 1 | I | PCM_marbastlib-mx:SW_MX_1u | SW37 |
| 1 | J | PCM_marbastlib-mx:SW_MX_1u | SW51 |
| 1 | K | PCM_marbastlib-mx:SW_MX_1u | SW52 |
| 1 | L | PCM_marbastlib-mx:SW_MX_1u | SW53 |
| 1 | M | PCM_marbastlib-mx:SW_MX_1u | SW65 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_2.25u | S4 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_6u | S8 |
| 1 | N | PCM_marbastlib-mx:SW_MX_1u | SW64 |
| 1 | O | PCM_marbastlib-mx:SW_MX_1u | SW38 |
| 1 | P | PCM_marbastlib-mx:SW_MX_1u | SW39 |
| 1 | PgDn | PCM_marbastlib-mx:SW_MX_1u | SW57 |
| 1 | PgUp | PCM_marbastlib-mx:SW_MX_1u | SW43 |
| 1 | Q | PCM_marbastlib-mx:SW_MX_1u | SW30 |
| 1 | R | PCM_marbastlib-mx:SW_MX_1u | SW33 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | S | PCM_marbastlib-mx:SW_MX_1u | SW46 |
| 1 | SHIFT | PCM_marbastlib-mx:SW_MX_1u | SW69 |
| 1 | SPACE | PCM_marbastlib-mx:SW_MX_1u | SW72 |
| 1 | Shift | PCM_marbastlib-mx:SW_MX_1u | SW58 |
| 1 | T | PCM_marbastlib-mx:SW_MX_1u | SW34 |
| 1 | Tab | PCM_marbastlib-mx:SW_MX_1.5u | SW29 |
| 1 | U | PCM_marbastlib-mx:SW_MX_1u | SW36 |
| 1 | V | PCM_marbastlib-mx:SW_MX_1u | SW62 |
| 1 | W | PCM_marbastlib-mx:SW_MX_1u | SW31 |
| 1 | WIN | PCM_marbastlib-mx:SW_MX_1.25u | SW74 |
| 1 | X | PCM_marbastlib-mx:SW_MX_1u | SW60 |
| 1 | Y | PCM_marbastlib-mx:SW_MX_1u | SW35 |
| 1 | Z | PCM_marbastlib-mx:SW_MX_1u | SW59 |
The 166 most common of 170 parts.
Similar boards
- 2 layers124 × 115.4 mm

- 2 layers75.2 × 74.7 mm

ESP32-EVB Rev K2
OLIMEX/ESP32-EVB
ESP32 WiFi / BLE Development board with Ethernet interface, Relays, microSD card
170 parts287Apache-2.0 - 2 layers100 × 149.5 mm

Rs485-moist sensor pannel
Miceuz/rs485-moist-sensor
Digital (RS485 - based) soil moisture and temperature sensor
170 parts74Apache-2.0 - 2 layers399 × 103 mm

- 2 layers291 × 153.2 mm

- 2 layers99 × 69 mm

MSI001
ATmega8/kiterf
Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
170 parts25MIT - 2 layers99.1 × 99.1 mm

Miasma Main smd
JMHanson4/Miasma_1.03_Revised
1) Updated the footprints and symbols to ones included in KiCAD 5.1.5, or otherwise included the auxillary libraries in the repository.
170 parts23 - 2 layers256 × 121 mm

Forte PA Deck
SP6GK/Forte-600-HF-RF-Amplifier
Project of 600 W LDMOS amlifier based on 2xMRF300.
170 parts17GPL-3.0
Questions
How big is the Magic-27 PCB?
It measures 343.5 × 143 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Magic-27 use?
170 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magic-27 KiCad files?
From the SPJ27/magic-27-keyboard repository on GitHub, at the commit this page was made from: the board is magic-27.kicad_pcb and its schematic magic-27.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magic-27 design in my own project?
Its repository states no licence, so its author keeps all rights: ask SPJ27 before reusing the design.