Skip to the content
2 layers100 × 100 mmPlatter, the printed circuit board in 3D

PCB-based phonograph "badge"

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
26
Pads
55
Tracks, vias
77, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
14 Sep 2022
Updated
3 Nov 2022

Overview

Platter is an open-source printed circuit board by sphawes, from the sphawes/voltavox repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 14 parts on 26 nets, routed with 77 tracks and 0 vias.

Its parts include 12 connectors, 1 IC and 1 switch.

README

README.md

Voltavox

Voltavox is a PCB-based phonograph "badge"!

Made primarially from PCBs, you can take a tiny PCB record, place it on the platter, place the needle on the record, and a song begins to play! Put a different record on, and as expected, you'll get a different song.

Voltavox is based heavily on the Adafruit Audio FX Sound Board. Using arturo182's FlexyPins and some castellated edges on the record PCBs, each record selectively pulls a different control pin on the Audio FX board to ground, choosing a different track. Dropping the needle onto the record completes the circuit and starts playing the audio. The horn is also comprised of PCBs soldered edge-to-edge, with a small speaker inside.

BOM

Off The Shelf

PCBs

ItemQuantityOrder InstructionsNote
Record1+1.6mm PCB, 1oz copper. Gloss Black Soldermask, Lead-Free HASL finish.Has castellated pads to interface with the FlexyPins. Be sure to include a note to your board shop.
Platter11.6mm PCB, 1oz copper. Matte Black Soldermask, Lead-Free HASL finish.-
Needle11.6mm PCB, 1oz copper. Gloss Black Soldermask, Lead-Free HASL finish.-
Horn Tier 181.6mm PCB, 1oz copper. Matte Black Soldermask, ENIG gold immersion finish.Has castellated edges that are used for structural soldering. Be sure to include a note to your board shop.
Horn Tier 281.6mm PCB, 1oz copper. Matte Black Soldermask, ENIG gold immersion finish.Has castellated edges that are used for structural soldering. Be sure to include a note to your board shop.

3D Prints

ItemQuantityMaterialNote
base1Wood PLAPrint with supports at 0.2mm layer height, 15% infill or more
horn-base-adapter1Silver PLAPrint with supports at 0.2mm layer height, 20% infill or more
drawer1Wood PLAPrint without supports at 0.2mm layer height, 15% infill or more
needle-mount1Silver PETGPrint without supports at 0.2mm layer height, 20% infill or more
pin1Silver PLAPrint without supports at 0.2mm layer height, 15% infill or more

Parts

14
QtyValueFootprintReferences
1Adafruit_Audio_FX_Sound_Board_Ampvoltavox:Adafruit_Audio_FX_BoardU1
1FX_0FlexyPin:FlexyPin_1x01_P2.54mmJ2
1FX_1FlexyPin:FlexyPin_1x01_P2.54mmJ3
1FX_2FlexyPin:FlexyPin_1x01_P2.54mmJ4
1FX_3FlexyPin:FlexyPin_1x01_P2.54mmJ5
1FX_4FlexyPin:FlexyPin_1x01_P2.54mmJ6
1FX_5FlexyPin:FlexyPin_1x01_P2.54mmJ8
1FX_6FlexyPin:FlexyPin_1x01_P2.54mmJ9
1FX_7FlexyPin:FlexyPin_1x01_P2.54mmJ10
1FX_8FlexyPin:FlexyPin_1x01_P2.54mmJ11
1FX_9FlexyPin:FlexyPin_1x01_P2.54mmJ12
1LIPO_CHARGERConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1LeftJ7
1NEEDLETestPoint:TestPoint_Pad_D2.0mmJ1
1SW_SPSTJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmSW1

More from sphawes/voltavox

1
  • 2 layers46.5 × 7.9 mmRecord, the printed circuit board in 3D

    Record

    sphawes/voltavox

    PCB-based phonograph "badge"

    21 partsGPL-3.0

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Platter PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Platter use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Platter KiCad files?

From the sphawes/voltavox repository on GitHub, at the commit this page was made from: the board is pcb/platter/platter.kicad_pcb and its schematic pcb/horn/tier1/tier1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Platter design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).