speters/CNC_BoosterWingCNC breakout board for the TM4C1294CL Launchpad running grbHAL
CNC Boosterpack is an open-source printed circuit board by speters, from the speters/CNC_BoosterWing repository on GitHub. It is a 2-layer board of 151.4 × 45.7 mm with 159 parts on 115 nets, routed with 1,524 tracks and 377 vias.
It is built around the TPS54331DR-JSM, EL357N(B)(TA)-G and TCA9406YZP, with the MMBT5551, AO3400A and HSU3016 among its other parts. Its parts include 64 resistors, 22 capacitors, 19 connectors, 17 diodes and 15 ICs. It belongs with the robots and motor control and interfaces and adapters boards of this library.
A breakout board for the Texas Instruments EK-TM4C1294XL Launchpad running the grblHAL TM4C1294 firmware by Terje Io.
This is a Frankenstein style child of GRBLHAL2000 and CNC_Boosterpack.
There were two objectives for this:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 2k2 | Resistor_SMD:R_0603_1608Metric | R7, R8, R13, R14, R15, R19, R20, R21, R23, R26, R29, R32, R35, R38, R41, R44 +1 |
| 17 | 4k7 | Resistor_SMD:R_0603_1608Metric | R4, R5, R10, R11, R12, R16, R17, R18, R22, R25, R28, R31, R34, R37, R40, R43 +1 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C7, C8, C9, C10, C11, C12, C13, C19, C22 |
| 12 | EL357N(B) | Library:SO-5_4.4x3.6mm_P1.27mm_fake | U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14 |
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R24, R27, R30, R33, R36, R39, R42, R45, R63 |
| 9 | MMBT5551 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 8 | 4,7k | Resistor_SMD:R_0603_1608Metric | R48, R49, R52, R53, R56, R57, R60, R61 |
| 8 | LED y | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J1, J2, J3, J4, J5 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R47, R51, R55, R59 |
| 4 | 510 | Resistor_SMD:R_0603_1608Metric | R46, R50, R54, R58 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q10, Q12, Q13, Q14 |
| 4 | B5819W SL | Diode_SMD:D_SOD-123 | D9, D11, D13, D15 |
| 4 | LED wt | LED_SMD:LED_0603_1608Metric | D10, D12, D14, D16 |
| 3 | 22uF 10V | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5 |
| 3 | StepperDrv | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J12, J13, J14 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric | C20, C21 |
| 2 | 6K8 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | HSU3016 | Package_TO_SOT_SMD:TO-252-2 | Q11, Q15 |
| 2 | VDrvGND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Lk5, Lk6 |
| 2 | VDrvSel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Lk2, Lk3 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C14 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R64 |
| 1 | 33uH | Inductor_SMD:L_Neosid_SM-PIC0602H | L1 |
| 1 | 51k | Resistor_SMD:R_0402_1005Metric | R62 |
| 1 | 5V off | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J15 |
| 1 | 6.8n | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 8.2n | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | BPConnL | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | P5 |
| 1 | BPConnR | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | P6 |
| 1 | Control | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | P1 |
| 1 | EEPROMaddr | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | Lk4 |
| 1 | Flood | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J11 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | I2CDrv | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Lk1 |
| 1 | Limits | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | P2 |
| 1 | M24C64 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Mist | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | SS54 | Diode_SMD:D_SMA | D17 |
| 1 | Spindle | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J9 |
| 1 | TCA9406 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U1 |
| 1 | TPS54331DR | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U15 |
| 1 | UART/GPIO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
It measures 151.4 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
159 parts, built around the TPS54331DR-JSM, EL357N(B)(TA)-G, TCA9406YZP and MMBT5551. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the speters/CNC_BoosterWing repository on GitHub, at the commit this page was made from: the board is CNC Boosterpack.kicad_pcb and its schematic CNC Boosterpack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask speters before reusing the design.
mgalleguilloscespedes-png/proyectro-stm32
en mi afán por el diseño 3d y la electrónica decidí crear mi propia versión de una placa controladora para impresora 3d, basándome en el microcontrolador stm32h723zet6 y la pcb de bigtreetech manta mp8
terjeio/CNC_Breakout_Nucleo64
CNC breakout for STM324F411 and ST32F446 development boards
terjeio/CNC_Boosterpack
A BoosterPack that provides 3-axis motor support for some TI LaunchPads
flaviut/30a-water-heater-controller
Makes any resistive water heater 30A or less WiFi controllable
gmeirelles-ops/esp32-DPTri
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.
axvelo/PCB-Kicad-F446
A custom CNC control interface board designed with KiCad 9.0, intended for use with LinuxCNC and the Remora STM32F446 / W5500 firmware real-time firmware.