2 layers52.2 × 52.2 mm
Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
43 parts3kApache-2.0
2 layers86.9 × 46.9 mm
Picon kicad
speedypotato/PiconA breakout board for the Raspberry Pi Pico for Yuancon or DIY Controllers
- Size
- 86.9 × 46.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 58
- Pads
- 219
- Tracks, vias
- 400, 25
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Sep 2021
- Updated
- 18 Sep 2021
Overview
Picon kicad is an open-source printed circuit board by speedypotato, from the speedypotato/Picon repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 86.9 × 46.9 mm with 43 parts on 58 nets, routed with 400 tracks and 25 vias.
Its parts include 17 resistors and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdPicon
A breakout board for the Raspberry Pi Pico for Yuancon or DIY Controllers
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 120R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15 |
| 14 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J_BT1, J_BT2, J_BT3, J_BT4, J_BT5, J_BT6, J_BT7, J_BT8, J_BT9, J_ENC1, J_ENC2, J_RGB1, J_RGB2, J_USB1 |
| 6 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4, H5, H6 |
| 4 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J_WS2812B1, J_WS2812B2, J_WS2812B3, J_WS2812B4 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | USBC1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
Similar boards
- 2 layers146.1 × 49.5 mm
Breakout 121pin 368255-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
43 parts1.2k - 2 layers33 × 34 mm
- 2 layers96.1 × 78.6 mm
EYEBROW WARNING INDICATOR RIGHT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
43 parts431 - 2 layers42.9 × 19 mm
- 2 layers99.1 × 99.7 mm
RC6502 Prototyping
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
43 parts193GPL-3.0 - 2 layers26.6 × 38.7 mm
Mdb slave esp32s3-mini
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
43 parts190MIT - 2 layers97.3 × 71 mm
ZynScreen v1
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
43 parts156
Questions
How big is the Picon kicad PCB?
It measures 86.9 × 46.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Picon kicad use?
43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Picon kicad KiCad files?
From the speedypotato/Picon repository on GitHub, at the commit this page was made from: the board is Picon_kicad/Picon_kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Picon kicad design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).