2 layers100 × 100 mm
2 layers116.5 × 98 mm
DropBear
speeduino/Hardware283Official Speeduino hardware designs
- Size
- 116.5 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 191
- Nets
- 271
- Pads
- 802
- Tracks, vias
- 2,130, 417
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 May 2021
- Updated
- 4 Apr 2026
Overview
DropBear is an open-source printed circuit board by speeduino, from the speeduino/Hardware repository on GitHub. It is a 2-layer board of 116.5 × 98 mm with 191 parts on 271 nets, routed with 2,130 tracks and 417 vias.
It is built around the TC4424AVOA, LMV324LIDT and KP234, with the W25Q32JVSSIQ, ZXMS6006DT8TA and 74AHC1G32GW among its other parts. Its parts include 69 resistors, 40 capacitors, 37 diodes, 21 ICs and 5 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
10
TC4424AVOA
SOIC-8-40℃~+150℃ 12ns 12ns 150uA 2 4.5A 4.5A 4.5V~18V MOSFET SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate Drivers
LMV324LIDT
SO-14-40℃~+125℃ 1.3MHz 120uA 2.7V~5.5V 27nA 30nA 31nV/√Hz@1kHz 4 5uV/℃ 700V/ms 70mA 75dB 7mV Rail-to-rail output SO-14 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierKP234
DSOF-8-40℃~+125℃ 4.5V~5.5V 40Kpa~1.15bar DSOF-8 Pressure Sensors ROHSInfineon TechnologiesPressure Sensors
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
ZXMS6006DT8TA
SOT-223-8-40℃~+125℃ 2 2.8A 60V 75mΩ Active High Low Side Switch Overvoltage protection、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SOT-223-8 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution Switches
74AHC1G32GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、3.94V、4.4V 100mV、100mV、100mV、550mV 1uA 2 2V~5.5V 500mV~1.65V 7.5ns@5V,50pF 74AHC Series 8mA 8mA OR Gate Overvoltage-tolerant input SOT-353 Logic Gates ROHSNexperiaLogic Gates
ADXL343BCC
LGA143-Axis, ±2g/±4g/±8g/±16g Digital MEMS AccelerometerAnalog DevicesUncategorised
MAX9926UAEE/V+T
QSOP-16-150mil-40℃~+125℃ 2 4.5V~5.5V Programmable gain、Differential output QSOP-16-150mil ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)ADC/DAC - Specialized
MC33814AE
LQFP-48(7x7)Overcurrent Protection、Output voltage tracking、Power-on timing control LQFP-48(7x7) Power Management - Specialized ROHSNXP SemiconductorsPower Management - SpecializedEBC05DRXN
插件,P=2.54mm-65℃~+125℃ 10P 2.54mm Gold Phosphor bronze Through Hole 插件,P=2.54mm Edgeboard Connectors ROHSSullins Connector SolutionsEdgeboard Connectors
README
README.md
[
A low cost, DIY friendly Engine Management System (ECU) based on the Arduino framework
Speeduino
The Speeduino project is a flexible, fully featured Engine Management Systems (EMS aka ECU) based on the low cost and open source Arduino platform. It provides the hardware, firmware and software components that make up an engine management system, all provided under open licenses. With over 1000 installations, Speeduino has matured into a product that meets the needs of the hobbyist and enthusiast community without driving prices to the levels of traditional aftermarket ECUs.
Overview
This repositiory contains the official Speeduino hardware designs. All new designs have been made in Kicad, with some early boards developed in Fritzing.
License
These designs are release under the CERN Open Hardware License v2 Strong (CERN-OHL-S). This license is similar to the GPL, however is designed specifically for hardware design files, including PCB layouts and schematics. As the 'strongly reciprocal' version of the CERN OHL is used, you may use, copy, modify and create variations of these designs freely, provided that any changes or variations are also released under this CERN-OHL-S.
Where to Buy
Pre-made Speeduino units/boards are available from a number of official resellers
These resellers all contribute a portion of sales back to the project to allow for continued development to take place and we encourage sales through them whenever possible.
Of course, being open source, you are free to use the design files provided here to create your own hardware!
Support
In addition the manual referenced above, Speeduino has a large and very vibrant community of people to help out with your setup or any questions you might add.
- Speeduino Forum
- Discord [blocked]
Contributors
This project exists thanks to all the people who contribute, both in terms of code and testing provided. If you'd like to get involved, please have a read through Contributing and then jump on Discord to discuss things further
Parts
191| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R10, R16, R19, R48, R49, R53, R60, R61, R62, R63, R64, R65 +7 |
| 16 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8, D30, D31, D32, D33, D34, D35, D36, D37 |
| 15 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C6, C8, C11, C12, C16, C17, C18, C19, C27, C29, C31, C33, C37 |
| 14 | D | Diode_SMD:D_SOD-323 | D14, D15, D16, D17, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28 |
| 7 | 470R | Resistor_SMD:R_0805_2012Metric | R13, R14, R20, R21, R22, R51, R52 |
| 6 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R33, R34, R42, R43, R44, R45 |
| 6 | 180k | Resistor_SMD:R_0805_2012Metric | R23, R24, R29, R46, R55, R57 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R31, R32, R38, R39, R40, R41 |
| 6 | 348k | Resistor_SMD:R_0805_2012Metric | R25, R26, R30, R47, R56, R58 |
| 5 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C25, C28, C35, C39, C40 |
| 5 | 0.22uF | Capacitor_SMD:C_0805_2012Metric | C14, C15, C20, C21, C22 |
| 5 | TC4424A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4, U7, U8, U12 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric | R27, R36, R37, R59 |
| 4 | SW_DPDT_x2 | Misc:AYZ0202AGRLC | SW1, SW2, SW3, SW5 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6, R35 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C10, C26, C38 |
| 3 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP3, JP4 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D12, D18, D29 |
| 3 | ZXMS6006DT8 | IC_Automotive:Diodes_SM8 | IC2, IC3, IC4 |
| 2 | 1nF | Capacitor_SMD:C_0805_2012Metric | C34, C36 |
| 2 | 2.49k | Resistor_SMD:R_0805_2012Metric | R17, R18 |
| 2 | 270nF | Capacitor_SMD:C_0805_2012Metric | C13, C23 |
| 2 | 33uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C7, C9 |
| 2 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C4, C5 |
| 2 | D_Schottky | Diode_SMD:D_PowerDI-123 | D9, D38 |
| 2 | LMV324LIDT | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U13, U20 |
| 2 | MC33810 | IC_Automotive:SOIC32-P0.65-33N | U5, U6 |
| 2 | Q_DUAL_NMOS_S1G1D2S2G2D1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q2, Q3 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R50 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C32 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C24 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R54 |
| 1 | 2.4k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_4x5.4 | C3 |
| 1 | 3.88k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12 |
| 1 | 4700pF | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 604R | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 74AHC1G32 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U11 |
| 1 | ADXL343 | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U9 |
| 1 | Battery_Cell | Misc:2999 | BT1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | D_Schottky | Diode_SMD:D_SMA_Handsoldering | D11 |
| 1 | D_TVS | Diode_SMD:D_SMB | D10 |
| 1 | Delphi_Sicma_24 | Connector_Automotive:Delphi_Sicma_24_Grey | J1 |
| 1 | Delphi_Sicma_24 | Connector_Automotive:Delphi_Sicma_24_Black | J2 |
| 1 | EBC05DRXN | Misc:EBC05DRXN | J3 |
| 1 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | KP234 | Misc:KP234 | U18 |
| 1 | MAX9926UAEE_V+ | Package_SO:QSOP-16_3.9x4.9mm_P0.635mm | IC1 |
| 1 | MC33814 | Package_QFP:LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm_ThermalVias | U2 |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U19 |
| 1 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | Polyfuse | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | Polyfuse | Fuse:Fuse_1812_4532Metric | F2 |
| 1 | Q_PNP_BCEC | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | SP720 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U10 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_9.78x7.26mm_W8.61mm_P2.54mm | SW4 |
| 1 | Teensy3.5 | Shields:Teensy35_36-main-pins-only | U1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U14 |
The 187 most common of 191 parts.
More from speeduino/Hardware
8- 2 layers100 × 100 mm
- 2 layers116.1 × 98 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers19.7 × 19.7 mm
- 2 layers19.8 × 15.9 mm
- 2 layers
Similar boards
- 2 layers168.9 × 124.3 mm
OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware
254 parts161CC0-1.0 - 4 layers154 × 159 mm
- 2 layers148 × 111.5 mm
ECU
HasiKe/Hayabusa
Eigenbau-Motorsteuerung und Umbauprojekte für die Suzuki Hayabusa der ersten Generation (1999–2007).
307 parts - 4 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19 - 4 layers116.5 × 98 mm
Hw v1
Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC
248 parts2 - 2 layers78.7 × 105.2 mm
Core4GPZ rev0-1
MIsfitMatty/Speeduino-2Wheel-prototype
It's build around the DIY-EFI's CORE4 board, with a custom "Daughter board", and use the Speeduino firmware. The CORE4 board is current choice for it's compact footprint, and fully featured board.
51 partsCERN-OHL-S-2.0 - 2 layers99.3 × 99.9 mm
- 2 layers21 × 51 mm
Pico2040-Rev4
zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
43 parts1
Questions
How big is the DropBear PCB?
It measures 116.5 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DropBear use?
191 parts, built around the TC4424AVOA, LMV324LIDT, KP234 and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DropBear KiCad files?
From the speeduino/Hardware repository on GitHub, at the commit this page was made from: the board is DropBear/V1.1/DropBear.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DropBear design in my own project?
Its repository states no licence, so its author keeps all rights: ask speeduino before reusing the design.