Skip to the content
2 layers95 × 65 mmModular eside rev11, the printed circuit board in 3D

Modular eside rev11

specs32/prolight1

Gyroscope Matrix Flashlight

Size
95 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
79
Nets
73
Pads
303
Tracks, vias
793, 136
Pours
25
Routed
Yes
KiCad
KiCad 4
Created
4 Apr 2018
Updated
22 May 2018

Overview

Modular eside rev11 is an open-source printed circuit board by specs32, from the specs32/prolight repository on GitHub. It is a 2-layer board of 95 × 65 mm with 79 parts on 73 nets, routed with 793 tracks and 136 vias.

It is built around the ATMEGA32U4RC-MUR, LSM6DS3TR-C and MIC5205-3.3YM5, with the TP4056 and DMN1004UFDF among its other parts. Its parts include 22 resistors, 15 capacitors, 10 diodes, 6 ICs and 6 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

5

README

README.md

prolight

Gyroscope Matrix Flashlight

click the wiki button in the menu above ! ;)

Parts

79
QtyValueFootprintReferences
510kΩResistors_SMD:R_0805_HandSolderingR7, R10, R11, R13, R19
510µFCapacitors_SMD:C_0805C1, C2, C12, C14, C15
41KΩResistors_SMD:R_0805_HandSolderingR4, R5, R9, R12
41µFCapacitors_SMD:C_0805C16, C17, C18, C19
3100nFCapacitors_SMD:C_0603C5, C10, C11
21KΩResistors_SMD:R_0805R2, R3
21MΩResistors_SMD:R_0805_HandSolderingR21, R22
222ΩResistors_SMD:R_0805_HandSolderingR15, R16
22N7002TO_SOT_Packages_SMD:SOT-23Q3, Q4
24.7KΩResistors_SMD:R_0805_HandSolderingR17, R18
2BUTTONLED_PINKLEDs:LED_0603_HandSolderingD7, D10
2DMN1004UFDFlt_foots:U-DFN2020-6Q1, Q5
2D_TVSCapacitors_SMD:C_0603D8, D9
2MAT_PWRMounting_Holes:MountingHole_2.2mm_M2_PadMK2, MK6
2VCCMounting_Holes:MountingHole_2.2mm_M2_PadMK4, MK5
11.2KΩResistors_SMD:R_0805_HandSolderingR1
1100 nFCapacitors_SMD:C_0603C9
1100nFCapacitors_SMD:C_0805C3
110KΩResistors_SMD:R_0805_HandSolderingR6
110µHCapacitors_SMD:C_0805_HandSolderingL1
115KΩResistors_SMD:R_1210R8
11kΩResistors_SMD:R_0805_HandSolderingR14
1390kΩResistors_SMD:R_0805_HandSolderingR20
1470pFCapacitors_SMD:C_0603C13
1AT25_EEPROMHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU5
1ATMEGA32U4-RC-MUHousings_DFN_QFN:QFN-44-1EP_7x7mm_Pitch0.5mmU2
1GREENLEDs:LED_0603_HandSolderingD2
1ISP_Conn_01x06lt_foots:Conn_01x06_SMD_2mmJ3
1JTAG_Conn_01x06lt_foots:Conn_01x06_SMD_2mmJ2
1LIPO_W_NTClt_foots:CONN_AVX_RT_ANGLE_3pin_2.5mm_pitchBAT1
1LOGOlt_foots:cc-by-saG***
1LOGOlt_foots:logo_QR_TAG_smallG***
1LSM6DS3TRlt_foots:LGA-14L_2.5x3mm__LSM6DS3U3
1MAT_SIGMounting_Holes:MountingHole_2.2mm_M2_PadMK3
1MIC5205-3.3TO_SOT_Packages_SMD:SOT-23-5U4
1OLED_0.86_14PINOLED_0.86_14pin_i2cU6
1PWM_1Mounting_Holes:MountingHole_2.2mm_M2_PadMK1
1Polyfuse_1A_holdCapacitors_SMD:C_0805_HandSolderingF1
1REDLEDs:LED_0603_HandSolderingD1
1R_Pack_10kΩResistors_SMD:R_Array_Convex_4x0603RN2
1R_Pack_1kΩResistors_SMD:R_Array_Convex_4x0603RN1
1SOT-23TO_SOT_Packages_SMD:SOT-23Q2
1SOT-32TO_SOT_Packages_SMD:SOT-23Q6
1STAT_GRNLEDs:LED_0603_HandSolderingD6
1STAT_ORANGELEDs:LED_0603_HandSolderingD4
1STAT_REDLEDs:LED_0603_HandSolderingD3
1STAT_YELLOWLEDs:LED_0603_HandSolderingD5
1SW_MODEButtons_Switches_SMD:SW_SPST_FSMSMSW2
1SW_MODElt_foots:white_nano_smd_switchSW1
1TEMP_Conn_01x02Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mmJ4
1TP4056Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mmU1
1USB_Micro_Jacklt_foots:Conn_USBmicro-B_ebay-side_TH_GROUNDJ1
1Wippschalter_smdlt_foots:smd_wippschalterSW3

More from specs32/prolight

2

Similar boards

  • 2 layers41.9 × 55.6 mmTrace Talk, the printed circuit board in 3D

    Trace Talk

    Sadrita404/Trace-Talk

    TraceTalk is a Walkie talkie radio pin badge with a custom PCB and an ATMEGA328P (Arduino) microcontroller. Integrated rechargable battery, can be charged using any USB-C cable and USB power supply.

    44 partsMIT
  • 4 layers32.4 × 40.2 mmSmartwatch, the printed circuit board in 3D

    Smartwatch

    Pedro-Seixas/Smartwatch

    A custom-designed smartwatch built around the ESP32-S3, combining BLE connectivity, a rectangular touch display, recharge capability, IMU and temperature sensors. Designed from the ground up in KiCad.

    55 partsMIT
  • 2 layers30.6 × 37.4 mmGlowBandSmall, the printed circuit board in 3D

    GlowBandSmall

    LEDs-by-glowingkitty/GlowBand

    GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.

    52 parts4MIT
  • 2 layers60 × 35 mmLux minimus, the printed circuit board in 3D

    Lux minimus

    machadoleonardo94/lux-et-tenebris

    Devkit for LED strips, with wide range of voltage inputs, and options for current limited outputs

    46 parts10BSD
  • 2 layers55.4 × 33 mmWasd code upgrade, the printed circuit board in 3D

    Wasd code upgrade

    cbiffle/keybrain

    Drop-in replacement controller for WASD CODE v2B keyboard

    24 parts82
  • 2 layers65.2 × 100 mmGk midi module, the printed circuit board in 3D

    Gk midi module

    cycfi/nexus

    The Nexus breakout box

    115 parts20

Questions

How big is the Modular eside rev11 PCB?

It measures 95 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Modular eside rev11 use?

79 parts, built around the ATMEGA32U4RC-MUR, LSM6DS3TR-C, MIC5205-3.3YM5 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Modular eside rev11 KiCad files?

From the specs32/prolight repository on GitHub, at the commit this page was made from: the board is REV11/KICAD/eside_rev11/modular_eside_rev11.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Modular eside rev11 design in my own project?

Its repository states no licence, so its author keeps all rights: ask specs32 before reusing the design.