

An animatronic framework for CircuitPython.
- Size
- 100 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 61
- Pads
- 176
- Tracks, vias
- 203, 13
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Nov 2026
- Updated
- 4 Nov 2026
Overview
Midi is an open-source printed circuit board by SparkyBobo, from the SparkyBobo/animatronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 62 mm with 52 parts on 61 nets, routed with 203 tracks and 13 vias.
It is built around the 74AHC1G125GW, BSS138 and MBRA140, with the TSM680P06CH among its other parts. Its parts include 19 resistors, 8 diodes, 6 connectors, 4 ICs and 3 transistors. It belongs with the audio and music boards and the RP2040 boards of this library.
Main components
474AHC1G125GW
SOT-353-40℃~+125℃ 1 1 2V~5.5V 4.8ns@5.5V,50pF 40uA 74AHC 8mA 8mA Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsMBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky DiodesTSM680P06CH
-MOSFETsTaiwan Semiconductor
README
README.mdanimatronics
An animatronic framework for CircuitPython.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R12, R13 |
| 4 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R16, R17, R18 |
| 4 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19, R20, R21, R22 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R6, R11 |
| 3 | MIDI_IN | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D9, D10, D11 |
| 2 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 2 | MBRA140 | Diode_SMD:D_SMA_Handsoldering | D5, D8 |
| 1 | footprints:DP10062 | ||
| 1 | footprints:OSHW-LOGO-S | ||
| 1 | 0.1uF | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R30 |
| 1 | 3.9v | Diode_SMD:D_SOD-123 | D3 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 6N138 | Package_DIP:SMDIP-8_W9.53mm | U8 |
| 1 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | AZ1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Fuse | footprints:atc_fuse_vertical | F1 |
| 1 | I2C0 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J8 |
| 1 | I2C1 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J9 |
| 1 | LOGO | footprints:logo_cr_5x5 | G*** |
| 1 | MIDI In | footprints:MIDI_DIN_5 | J6 |
| 1 | MIDI_Out | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | Midi Out | footprints:Jack_3.5mm_Adafruit_1699_Horizontal | J2 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | Power | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J4 |
| 1 | Power | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 1 | Raspberry Pi Pico | footprints:RP_Pico_DIP | U4 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TSM680P06 | Package_TO_SOT_SMD:TO-252-2 | Q3 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J7 |
More from SparkyBobo/animatronics
7- 2 layers100 × 62 mm

- 2 layers64.1 × 28.6 mm

- 2 layers100 × 62 mm

- 2 layers99.9 × 61.9 mm

- 2 layers89.3 × 41.1 mm

- 2 layers99.9 × 61.9 mm

- 2 layers67.8 × 45.7 mm

Similar boards
- 2 layers74.9 × 86.4 mm

CamMotion
Tadjirovelzel/HomeBird
The project NestWacht in collaboration with the TU Delft and other benefactors aims to design a sensor station in the form of a birdhouse that uses a camera and weather sensors to document bird activity and monitor…
17 parts - 2 layers68.6 × 53.3 mm

Vehicle datalogger shield
wickerbox/Pothole-Project
Low-cost device to collect and report real-time road information for cities.
68 partsGPL-3.0 - 2 layers101.6 × 38.1 mm

- 2 layers49.9 × 39.4 mm

ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD
59 parts4 - 2 layers35.6 × 66.5 mm

- 2 layers73.1 × 87.8 mm

- 2 layers68.6 × 53.3 mm

- 2 layers91 × 154.9 mm

Questions
How big is the Midi PCB?
It measures 100 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Midi use?
52 parts, built around the 74AHC1G125GW, BSS138, MBRA140 and TSM680P06CH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Midi KiCad files?
From the SparkyBobo/animatronics repository on GitHub, at the commit this page was made from: the board is hardware/midi/midi.kicad_pcb and its schematic hardware/diagnostics/diagnostics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Midi design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).