Skip to the content
2 layers95 × 41.9 mmLED DISPLAY BOARD, the printed circuit board in 3D

Military Time Alarm Clock

Size
95 × 41.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
33
Pads
111
Tracks, vias
361, 18
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
23 Dec 2022
Updated
25 Mar 2024

Overview

LED DISPLAY BOARD is an open-source printed circuit board by sparkletron, from the sparkletron/mil_time_clock repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 41.9 mm with 23 parts on 33 nets, routed with 361 tracks and 18 vias.

It is built around the SM420561N. Its parts include 9 diodes, 5 switches, 4 ICs, 2 resistors and 1 connector. It belongs with the lEDs and displays boards of this library.

Main components

1

README

README.md

Military Time Clock

Military Time Clock using the 89S51 microcontroller.

author: Jay Convertino

date: 2022.12.11

license: MIT (software/hardware)

IMPORTANT: No build instructions are included. All parts needed are here, you're on your own.

Release Versions

Current

  • v1.0.2 = Fixed time base issues with a smaller range tuning cap.

Past

  • v1.0.1 = Sound buzz fixed with feedback bypass resistor.
  • v1.0.0 = Original Version

Requirements

Hardware

  • KiCad (v7.X.X)

Software

  • sdcc compiler (4.0.0 #11528)

Information

Directory Listing:

  • docs
    • Datasheets: Data documents for various ICs.
    • Manual: User manual for the clock.
  • schematic: KiCad schematic of Military Time Clock, including PCB design and bill of materials.
  • model
    • FreeCAD: Any FreeCAD models used in the project.
    • Inventor: Any Autodesk Inventor 2023 models used in the project (STL included).
  • src: Any source code for the project.
    • clock_sdcc: contains make file and code for the clock project.

Usage

Please see the user manual on how to use the project. Build instructions really depend on how you want to build it. It uses all through hole parts and could be done with something as simple as an etch kit, PCB mill, or a PCB fab.

Tuning

Recommend using a platic tuning tool to adjust trimmer cap. Track the freqency at the 2.048kHz and lower pins till they all match there expected outputs (all powers of two, 1024, 512, 128 etc). Also let the device run for about 15 minutes and check. Frequency will rise by 1 to 2 hz and then stablize within the first 30 seconds, but it is wise to triple check after some time has passed.

Parts

23
QtyValueFootprintReferences
9LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9
4SM420561NDisplay_7Segment:7SegmentLED_LTS6760_LTS6780U1, U2, U3, U4
2220RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_VerticalR1, R2
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2
1ALARM ONB3F-1020:B3F1000S4
1Conn_01x27Connector_PinSocket_2.54mm:PinSocket_1x27_P2.54mm_VerticalJ1
1HOURB3F-1020:B3F1000S2
1MINUTEB3F-1020:B3F1000S3
1SET TIMEB3F-1020:B3F1000S1
1SET_ALARMB3F-1020:B3F1000S5

More from sparkletron/mil_time_clock

2
  • 2 layers188.8 × 102.5 mmMil Time Clock, the printed circuit board in 3D

    Mil Time Clock

    sparkletron/mil_time_clock

    Military Time Alarm Clock

    107 partsMIT
  • 2 layers79.2 × 101.1 mmMCU BOARD, the printed circuit board in 3D

    MCU BOARD

    sparkletron/mil_time_clock

    Military Time Alarm Clock

    84 partsMIT

Similar boards

  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers98 × 135 mmDMH VCO 40106 PCB, the printed circuit board in 3D

    DMH VCO 40106 PCB

    DeMarco/DMH-VCO-40106

    VCO module based on the CD40106 Hex Inverter chip

    147 parts5
  • 2 layers258.1 × 122.9 mmFrontPanel, the printed circuit board in 3D

    FrontPanel

    89Mods/LVDC

    Replica of the Launch Vehicle Digital Computer using 74-series logic

    124 parts2MIT
  • 2 layers92 × 68.8 mmPanelized, the printed circuit board in 3D

    Panelized

    mpkendall/outpost-thingies

    45 parts2
  • 2 layers106 × 71.3 mmDesktop Hardware Monitor, the printed circuit board in 3D

    Desktop Hardware Monitor

    aapaetsch/HardwareMonitorArduino

    Code, pcb files and schematics for building a hardware monitor based around the atmega328p

    44 parts
  • 4 layers506 × 152.3 mmSignalmesh, the printed circuit board in 3D

    Signalmesh

    akielaries/signalmesh_CAD

    signalmesh schematic and PCB files

    310 parts

Questions

How big is the LED DISPLAY BOARD PCB?

It measures 95 × 41.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED DISPLAY BOARD use?

23 parts, built around the SM420561N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED DISPLAY BOARD KiCad files?

From the sparkletron/mil_time_clock repository on GitHub, at the commit this page was made from: the board is schematic/LED_DISPLAY_BOARD.kicad_pcb and its schematic schematic/LED_DISPLAY_BOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED DISPLAY BOARD design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).