2 layers123 × 116.3 mm
2 layers89 × 56 mm
Dashcam power
Spajciuch/dashcamMy DIY car dashcam project.
- Size
- 89 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 50
- Pads
- 116
- Tracks, vias
- 215, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Oct 2025
- Updated
- 15 Oct 2025
Overview
Dashcam power is an open-source printed circuit board by Spajciuch, from the Spajciuch/dashcam repository on GitHub, published under the MIT licence. It is a 2-layer board of 89 × 56 mm with 29 parts on 50 nets, routed with 215 tracks and 33 vias.
It is built around the AHQSH105LM100G. Its parts include 8 capacitors, 5 diodes, 4 resistors, 4 connectors and 2 inductors.
Main components
1Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1µF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C6, C8 |
| 2 | 1000µF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3, C7 |
| 2 | 100µF | Capacitor_SMD:C_1206_3216Metric | C1, C5 |
| 2 | D | Diode_SMD:D_SMB_Handsoldering | D4, D5 |
| 2 | D_Schottky | Diode_SMD:D_SMA | D2, D3 |
| 2 | L | Inductor_THT:L_Radial_D10.0mm_P5.00mm_Neosid_SD12k_style3 | L1, L2 |
| 2 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | LM2596HVGDP-1, LM2596HVGDP-2 |
| 1 | 1066 | 1066:BAT_1066 | RTC |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1K07 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1K96 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | AHQSH105LM100G | Library:AHQSH105LM100G | K1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_StarMicronics_QMX | BZ1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | Conn_02x20_Odd_Even | orangepi:orangepi_3b | J5 |
| 1 | D | Diode_SMD:D_SMA | D1 |
| 1 | NPN | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q1 |
| 1 | RESET_BTN | Connector_Hirose:Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical | J4 |
| 1 | RTC_OUT | Connector_Hirose:Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical | J3 |
Questions
How big is the Dashcam power PCB?
It measures 89 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dashcam power use?
29 parts, built around the AHQSH105LM100G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dashcam power KiCad files?
From the Spajciuch/dashcam repository on GitHub, at the commit this page was made from: the board is KiCAD/dashcam_power.kicad_pcb and its schematic KiCAD/dashcam_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dashcam power design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0 - 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
