2 layers90 × 100 mm
2 layers52 × 29 mm
PCB Interface imprimante 3d
Spacekoaster/Interface-PCBA small interface PCB to use on your 3D printer to connect the hotend to the motherboard
- Size
- 52 × 29 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 15
- Pads
- 45
- Tracks, vias
- 113, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Aug 2020
- Updated
- 17 Aug 2020
Overview
PCB Interface imprimante 3d is an open-source printed circuit board by Spacekoaster, from the Spacekoaster/Interface-PCB repository on GitHub. It is a 2-layer board of 52 × 29 mm with 14 parts on 15 nets, routed with 113 tracks and 2 vias.
It is built around the RJHSE508002. Its parts include 8 connectors, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J6, J7 |
| 3 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3, J4, J5 |
| 1 | RJHSE508002 | RJHSE508002:RJHSE508002 | J1 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
Questions
How big is the PCB Interface imprimante 3d PCB?
It measures 52 × 29 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Interface imprimante 3d use?
14 parts, built around the RJHSE508002. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Interface imprimante 3d KiCad files?
From the Spacekoaster/Interface-PCB repository on GitHub, at the commit this page was made from: the board is PCB Interface imprimante 3d.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Interface imprimante 3d design in my own project?
Its repository states no licence, so its author keeps all rights: ask Spacekoaster before reusing the design.
Similar boards
- 4 layers90 × 100 mm
LVDS BeagleVFire Cape
ngpaladi/LVDS_BeagleVFire_Cape
Cape for LVDS inputs to a BeagleV Fire TDC
45 partsCERN-OHL-S-2.0 - 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0