2 layers27.3 × 13.2 mm
NovaMkII
SpacehuhnTech/USB-Nova-MkII-PCB
USB Nova is a cute little USB “drive” that acts as a keyboard, much like the USB Rubber Ducky, WiFi Duck, and other BadUSBs.
36 parts7CERN-OHL-P-2.0
2 layers28.8 × 14 mm
USB Nova Hardware Design Files
- Size
- 28.8 × 14 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 40
- Pads
- 83
- Tracks, vias
- 141, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Mar 2023
- Updated
- 18 Mar 2023
Overview
Nova is an open-source printed circuit board by SpacehuhnTech, from the SpacehuhnTech/USB-Nova-PCB repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 28.8 × 14 mm with 27 parts on 40 nets, routed with 141 tracks and 25 vias.
It is built around the ATSAMD21E18A-AU, W25Q32JVSSIQ and ME6211C33M5G-N, with the 1TS015A-2200-0600-CT, MK-12C02-G020 and U-USBAR04P-M001 among its other parts. Its parts include 4 capacitors, 3 ICs, 2 switches, 1 resistor and 1 diode. It belongs with the SAM D and SAM and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
7
ATSAMD21E18A-AU
TQFP-32(7x7)-40℃~+85℃ 1.62V~3.6V 10bit 12bit 256KB 26 32 Bit 32KB 48MHz ARM Cortex-M0+ Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Hardware CRC、Programmable watchdog、Calendar function、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1TS015A-2200-0600-CT
SMD,3x2mm-40℃~+90℃ 0.6mm 12V 2.2N 2mm 300,000 Cycles 3mm 50mA Black IP68 No Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,3x2mm Tactile Switches ROHSHYPTactile Switches
MK-12C02-G020
SMD,6.6x1.4mm-20℃~+70℃ 1.4mm 10,000 Cycles 1A 4.7mm 6.6mm 6V Black Rectangular Columnar SPDT Surface Mount, Right Angle SMD,6.6x1.4mm Slide Switches ROHSG-SwitchSlide Switches
U-USBAR04P-M001
插件0℃~+50℃ 1 1.5A 1500 Cycles 18.8mm 30V 4P Laminated board Male Type-A USB 2.0 White 插件 USB Connectors ROHSCkmtwUSB Connectors
WS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
README.mdUSB-Nova-PCB
USB Nova Hardware Design Files
USB Nova is a cute little USB “drive” that acts as a keyboard, much like the USB Rubber Ducky, WiFi Duck, and other BadUSBs.
Learn about the Project at usbnova.com.
Buy one at spacehuhn.store.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | LOGO | Artwork:star_tiny | G***, G***, G***, G*** |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | LOGO | Artwork:star_small | G***, G*** |
| 1 | 1TS015A-2200-0600-CT | _mykicadlib:SW-SMD_L3.0-W2.0-LS3.5 | SW1 |
| 1 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATSAMD21E18A-AUT | _mykicadlib:ATSAMD21E18A-AUT | U3 |
| 1 | LOGO | Artwork:nova | G*** |
| 1 | LOGO | Artwork:spacehuhncom | G*** |
| 1 | LOGO | Artwork:spacehuhn_logo_text_small | G*** |
| 1 | LOGO | Artwork:oshw_logo_small | G*** |
| 1 | ME6211C33M5G-N | _mykicadlib:SOT-25-5_ME6211C33M5G | U1 |
| 1 | MK-12C02-G020 | _mykicadlib:SW_MK-12C02-G020 | SW2 |
| 1 | U-USBAR04P-M001 | _mykicadlib:USB-A_Plug_THT_U-USBAR04P-M001 | J1 |
| 1 | W25Q32JVSS | _mykicadlib:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | WS2812B-2020 | _mykicadlib:LED-SMD_4P-L2.0-W2.0-TL_WS2812B-2020 | D1 |
Similar boards
- 2 layers10.3 × 14.6 mm
USB Data Blocker
SpacehuhnTech/USB-Blocker-PCB
USB Data Blocker & USB Power Blocker
2 parts36CERN-OHL-S-2.0 - 4 layers56.9 × 20 mm
- 2 layers86.5 × 27.5 mm
Comfospot50 full
cornim/comfospot50
The schematic and PCB in this directory are the project-authored controller board design. The board is intended to interface an ESP32-C3 with the existing ComfoSpot panel.
29 parts4GPL-3.0 - 4 layers92.9 × 45 mm
Post box usb
google/myelin-acorn-electron-hardware
Phillip Pearson's retro hardware projects for the Acorn Electron
116 parts59Apache-2.0 - 2 layers68 × 58 mm
Iot data logger nfc samd21
polesskiy-dev/iot-risk-data-logger-nfc-samd21-hardware
Hardware (schematics, PCB, BOM) for iot-risk-data-logger-nfc-samd21 project
66 parts5MIT - 2 layers11.2 × 19.6 mm
- 4 layers43.2 × 78.7 mm
A3000 rom emulator
myelin/arcflash
Adapter board to allow an "arcflash" A3000 ROM emulator to work on a Risc PC.
112 parts3Apache-2.0
Questions
How big is the Nova PCB?
It measures 28.8 × 14 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nova use?
27 parts, built around the ATSAMD21E18A-AU, W25Q32JVSSIQ, ME6211C33M5G-N and 1TS015A-2200-0600-CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nova KiCad files?
From the SpacehuhnTech/USB-Nova-PCB repository on GitHub, at the commit this page was made from: the board is Nova.kicad_pcb and its schematic Nova.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nova design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).