

Control de acceso
int tiempo; const char ssid = "MovistarFibra-A9B820"; //la Red WI-FI const char password = "nk58sgmCjzJ7GgTKo8q"; //Clave de la red const uint8t ROWS = 4; const uint8t COLS = 4; char keys[ROWS][COLS] = { //se crea una…
- Size
- 205.1 × 137.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 50
- Pads
- 384
- Tracks, vias
- 612, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Aug 2024
- Updated
- 1 Dec 2024
Overview
Control de acceso is an open-source printed circuit board by sp3ct3r1, from the sp3ct3r1/control-de-acceso repository on GitHub. It is a 2-layer board of 205.1 × 137.3 mm with 84 parts on 50 nets, routed with 612 tracks and 0 vias.
It is built around the L7805ACD2T-TR and EEEFC1H101P. Its parts include 28 connectors, 16 resistors, 12 ICs, 8 capacitors and 8 transistors. It belongs with the ESP32 boards of this library.
Main components
2L7805ACD2T-TR
TO-263-20℃~+125℃@(Tj) 1 1.5A 25V 2V@(1A) 5V 68dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-263-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsEEEFC1H101P
SMD,D10xL10.2mm-40℃~+105℃ 10.2mm 1000hrs@105℃ 100uF 10mm 375mA@120Hz 50V Polarized ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitors - SMD ROHSPanasonicAluminum Electrolytic Capacitors - SMD
README
README.mdcontrol de acceso con RFID
Este es un proyecto de un control de acceso con un lector RFID, utilizando un ESP32 como microcontrolador.
Los componentes utilizados son:
- RFID RC522
- ESP32 dev kit v1
- lcd display 16x5
- Placa 10x7cm
- Buzzer
- Regulador 9v-5v L7805ACD2T
- Rele 9v PC817
- Keypad 4x4
- bornera de 2
- bornera de 3
- 4 Resitencias SMD de ohms
Para este proyecto, utilizamos un servidor para guardar la informacion de cada persona y tarjeta. asi se puede identificar cuando el RFID lee una tarjeta, si el codigo esta en la base de datos, se le permitira el acceso. de lo contrario, lo rechaza. En la variable "SSID" y "PASSWORD" se coloca a que red se quiere conectar el esp32, y la contraseña para asi estar conectado con el servidor.
#include <WiFi.h>
#include <HTTPClient.h>
#include <Keypad.h>
#include <LiquidCrystal_I2C.h>
#include <SPI.h>
#include <MFRC522.h>
#define SS_PIN 5
#define RST_PIN 0
MFRC522 mfrc522(SS_PIN, RST_PIN);
int tiempo;
const char* ssid = "MovistarFibra-A9B820"; //la Red WI-FI
const char* password = "nk58sgmCjzJ7GgTKo8q"; //Clave de la red
const uint8_t ROWS = 4;
const uint8_t COLS = 4;
char keys[ROWS][COLS] = {
//se crea una malla de como es el pad, con sus botones asignados. luego, se definira que conexion es para que boton presionado
{ '1', '2', '3', 'A' },
{ '4', '5', '6', 'B' },
{ '7', '8', '9', 'C' },
{ '*', '0', '#', 'D' },
};
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | R | EESTN5:R_0805 | R1, R1, R1, R1, R2, R2, R2, R2, R3, R3, R3, R3, R4, R4, R4, R4 |
| 8 | 2N3904 | MMBT3904-7-F:SOT95P230X110-3N | Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2 |
| 8 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J2, J2, J2, J6, J6, J6, J6 |
| 8 | EEEFC1H101P | EEEFC1H101P:CAP_EEEFC1H101P | C1, C1, C1, C1, C2, C2, C2, C2 |
| 4 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1, BZ1, BZ1, BZ1 |
| 4 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J7, J7, J7 |
| 4 | Conn_01x08_Socket | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J1, J1, J1 |
| 4 | DIODE | Diode_SMD:D_SMA | D1, D1, D1, D1 |
| 4 | ESP32_DevKit_V1_DOIT | EESTN5:ESP32_DEVKIT_V1_DOIT | U1, U1, U1, U1 |
| 4 | L7805ACD2T | L7805ACD2T:VREG_L7805ACD2T | U3, U3, U3, U3 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U2, U2, U2 |
| 4 | RELAY_C | EESTN5:Relay_C | K1, K1, K1, K1 |
| 4 | TB | EESTN5:BORNERA2_AZUL | J5, J5, J5, J5 |
| 4 | TBR | EESTN5:BORNERA2_AZUL | J3, J3, J3, J3 |
| 4 | TB_1X3 | EESTN5:BORNERA3_Vertical | J4, J4, J4, J4 |
Similar boards
- 4 layers77.7 × 41 mm

- 2 layers61.3 × 86.9 mm

- 4 layers100 × 43 mm

- 2 layers51.3 × 8.4 mm

Lyrebird Keyboard Class D Amp Card
Celcius1/Old-Projects-become-New
Electronics Projects from the 60's to 90's redone for the modern era
82 parts1GPL-3.0 - 4 layers123.8 × 76.2 mm

BalloonMotherboardV3
EggiEl/SpiCy-BEXUS
Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's…
198 parts1 - 2 layers182.2 × 116.6 mm

- 2 layers94.5 × 81.5 mm

ESP32-wroover adapter pan
pcbreflux/espressif
all espressif stuff will committed here
84 parts608GPL-3.0 - 2 layers45.8 × 38.3 mm

Framework input brkt
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
84 parts253GPL-3.0
Questions
How big is the Control de acceso PCB?
It measures 205.1 × 137.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control de acceso use?
84 parts, built around the L7805ACD2T-TR and EEEFC1H101P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control de acceso KiCad files?
From the sp3ct3r1/control-de-acceso repository on GitHub, at the commit this page was made from: the board is Control de acceso/Control de acceso.kicad_pcb and its schematic Control de acceso/Control de acceso.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control de acceso design in my own project?
Its repository states no licence, so its author keeps all rights: ask sp3ct3r1 before reusing the design.