Skip to the content
2 layers50 × 75 mmWeather, the printed circuit board in 3D

This project is open-source and licensed under the MIT License. ## Top view ## Seprerate view ## Misc view

Size
50 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
21
Pads
46
Tracks, vias
93, 7
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Dec 2024
Updated
17 Apr 2025

Overview

Weather is an open-source printed circuit board by souptik-samanta, from the souptik-samanta/Weather_station repository on GitHub. It is a 2-layer board of 50 × 75 mm with 17 parts on 21 nets, routed with 93 tracks and 7 vias.

It is built around the DHT11. Its parts include 3 ICs, 3 connectors and 1 resistor.

Main components

1

README

README.md

ZephyrStation

Overview

ZephyrStation is a DIY weather station designed to fetch and display real-time weather data using the OpenWeatherMap API. Built around a custom PCB featuring a Wemos C3 microcontroller, it includes a 1.8-inch TFT display and expandable pin headers for hardware hacking. ZephyrStation is ideal for tinkerers, developers, and anyone looking to explore IoT applications.

Features

  • API-Based Weather Data
    • Retrieves temperature, humidity, and other weather details via OpenWeatherMap.
  • Custom PCB Design
    • Includes a Wemos C3 microcontroller with organized pin headers for expandability.
  • Display
    • Integrated 1.8-inch TFT screen for real-time data visualization.
  • Wi-Fi Enabled
    • Uses the Wemos C3’s Wi-Fi capabilities for fetching API data.
  • Hackable Design
    • Expandable pin headers allow users to add custom sensors or peripherals.

Components

  • Main Components
    • Wemos C3 microcontroller for processing and connectivity.
    • 1.8-inch TFT display with SD card slot for data visualization.
    • Custom-designed PCB with accessible pin headers.
  • Optional Components
    • Additional sensors or modules connected via pin headers.
  • Power Supply
    • 3.3V or 5V input power source.

License 

This project is open-source and licensed under the MIT License.

Top view

alt text

Seprerate view

alt text

Misc view

alt text

BOM

-- Wesmos c3 -- tp4056 -- TFT_ST7735_SD -- dht 11 -- sd card

Schematic

alt text

PCB

alt text

3D VIEW

alt text

BOM

From Hq -- 10 WS2812B at .04$/led so 40 cents Provided by dari // alex:

-- 1x WeMos S2 Mini (as a cheaper replacement for the S2) WITHOUT FEMALE HEADERS -- 1x ST7735 1.8" LCD display WITHOUT FEMALE HEADERS. Male headers soldered! -- 1x 3D printed case

From LCSC -- headers -- screw -- DHT11 -- Antena

Parts

17
QtyValueFootprintReferences
2LOGOkicadlogos:communismsoldermaskG***, G***
110PCM_Resistor_THT_AKL:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1Conn_01x02_PinConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ3
1EXTRA PINSConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1LOGOkicadlogos:Lockheedf.cuG***
1LOGOkicadlogos:isromaskfG***
1LOGOkicadlogos:isroG***
1LOGOkicadlogos:lockheedsoldermaskG***
1LOGOkicadlogos:rtxG***
1TFT_ST7735_SDasylum-weather:TFT_ST7735_SDU2
1WEMOS_C3_Miniasylum-weather:WEMOS_C3_miniU3
1dht11Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1~asylum-weather:TP4056U1

The 14 most common of 17 parts.

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Weather PCB?

It measures 50 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Weather use?

17 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Weather KiCad files?

From the souptik-samanta/Weather_station repository on GitHub, at the commit this page was made from: the board is pcb/weather.kicad_pcb and its schematic pcb/weather.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Weather design in my own project?

Its repository states no licence, so its author keeps all rights: ask souptik-samanta before reusing the design.