4 layers109.8 × 59.1 mm
2 layers56.1 × 11.8 mm
Can test
SonOfCheevap/pcb_simulationsPCB simulation files using gerber2ems and openEMS
- Size
- 56.1 × 11.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 10
- Pads
- 45
- Tracks, vias
- 99, 12
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Apr 2026
- Updated
- 29 Apr 2026
Overview
Can test is an open-source printed circuit board by SonOfCheevap, from the SonOfCheevap/pcb_simulations repository on GitHub, published under the MIT licence. It is a 2-layer board of 56.1 × 11.8 mm with 17 parts on 10 nets, routed with 99 tracks and 12 vias.
It is built around the TCAN3414DRB and ESDCAN04-2BLY. Its parts include 4 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 diode.
Main components
2
TCAN3414DRB
SON-8-EP(3x3)-40℃~+150℃ 1 17uA 3V~3.6V 60mA 8Mbps CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SON-8-EP(3x3) CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
ESDCAN04-2BLY
SOT-23-40℃~+150℃ 17pF 2 230W@8/20us 25.5V 30.7V 3A@8/20us 43V 50nA Bidirectional IEC 61000-4-2 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdpcb_simulations
PCB simulation files using gerber2ems and openEMS
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 60 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R24, R25 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 2 | 560pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 2 | TCAN3414DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC1, IC2 |
| 1 | ESDCAN04-2BLY | Package_TO_SOT_SMD:TSOT-23_HandSoldering | D4 |
| 1 | SP1 | SP1 | |
| 1 | SP2 | SP2 | |
| 1 | SP3 | SP3 | |
| 1 | SP4 | SP4 |
Questions
How big is the Can test PCB?
It measures 56.1 × 11.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Can test use?
17 parts, built around the TCAN3414DRB and ESDCAN04-2BLY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Can test KiCad files?
From the SonOfCheevap/pcb_simulations repository on GitHub, at the commit this page was made from: the board is can_test/board/can_test.kicad_pcb and its schematic can_test/board/can_test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Can test design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers90.2 × 95.9 mm
TET
ICDT-Inatel-Cubesat-Design-Team/TET-Module
A reliable 1U CubeSat TT&C subsystem featuring an STM32L4 MCU, LoRa radio for long-range communication, CAN Bus, and TMR SPI Flash for critical space applications.
87 parts5CERN-OHL-W-2.0 - 4 layers50.1 × 85.2 mm
LIONv3
RodrigoCAndrade/LIONv3-R
The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
89 parts4 - 4 layers50.2 × 40.2 mm
LIONv3
RodrigoCAndrade/LIONv3-Mini
The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
88 parts2 - 4 layers110 × 75 mm
MainBoard nonRJ45
Gold-Rush-Robotics/pcb_2024
A repository to store work done on PCBs for the 2024 season
85 parts1MIT - 2 layers50 × 31 mm
- 4 layers100 × 50 mm
- 4 layers38.1 × 73.1 mm
Conversion pcb
UVicRocketry/A3-Sensors-DAQ
A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software.
122 parts