Skip to the content
2 layersLed, the printed circuit board in 3D

Produced by JLCPCB. It never lit up; the faults are in DESIGN.md §1.

Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
9
Pads
18
Tracks, vias
12, 0
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
28 Mar 2026
Updated
3 Nov 2026

Overview

Led is an open-source printed circuit board by somebox, from the somebox/rgb-spotlight repository on GitHub. It is a 2-layer board with 12 parts on 9 nets, routed with 12 tracks and 0 vias.

It is built around the XL-HD2525UBC-A4, XL-HD2525UGC-A4 and XL-HD2525SURC-A4.

Main components

3

README

archive/v1-easyeda/README.md

v1 — EasyEDA design (Mar 2026), archived

Produced by JLCPCB. It never lit up; the faults are in DESIGN.md §1.

FileWhat
SCH_rgb-discreet-leds_2026-10-05.jsonEasyEDA Std schematic export
PCB_PCB_rgb-discreet-leds_2026-10-05.jsonEasyEDA Std PCB export
v1-easyeda.kicad_pcbKiCad import of the PCB (kicad-cli pcb import), as-built reference only
v1-netlist.txtas-built netlist taken from the PCB pads
v1-front.png, v1-back-mirrored.pngrenders of the import
rgb-spotlight-bom-v1.mdv1 BOM and rationale. Its PT4115 connection tables and 78L05 pin table are wrong (see DESIGN.md §1)

The KiCad import DRCs with many clearance and silk notes against KiCad's default rules. That's expected; it is not a design to fabricate from.

Parts

12
QtyValueFootprintReferences
3M3MountingHole:MountingHole_3.2mm_M3H1, H2, H3
1B+rgb-spotlight:WirePad_2.2x3.5mmTP5
1B-rgb-spotlight:WirePad_2.2x3.5mmTP6
1BLUErgb-spotlight:LED_XINGLIGHT_HD2525LED3
1G+rgb-spotlight:WirePad_2.2x3.5mmTP3
1G-rgb-spotlight:WirePad_2.2x3.5mmTP4
1GREENrgb-spotlight:LED_XINGLIGHT_HD2525LED2
1R+rgb-spotlight:WirePad_2.2x3.5mmTP1
1R-rgb-spotlight:WirePad_2.2x3.5mmTP2
1REDrgb-spotlight:LED_XINGLIGHT_HD2525LED1

More from somebox/rgb-spotlight

2
  • 2 layersV1-easyeda, the printed circuit board in 3D

    V1-easyeda

    somebox/rgb-spotlight

    Produced by JLCPCB. It never lit up; the faults are in DESIGN.md §1.

    43 parts
  • 2 layersDriver, the printed circuit board in 3D

    Driver

    somebox/rgb-spotlight

    Produced by JLCPCB. It never lit up; the faults are in DESIGN.md §1.

    39 parts

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

What parts does the Led use?

12 parts, built around the XL-HD2525UBC-A4, XL-HD2525UGC-A4 and XL-HD2525SURC-A4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led KiCad files?

From the somebox/rgb-spotlight repository on GitHub, at the commit this page was made from: the board is boards/led/led.kicad_pcb and its schematic boards/driver/driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led design in my own project?

Its repository states no licence, so its author keeps all rights: ask somebox before reusing the design.