2 layers101 × 54.6 mm
EPICS elephant project
Tennsei/EPICS_Elephant_Detection_Project
This is for the schematics and design for the EPICS Elephant Project
34 parts
2 layers102 × 60 mm
LDriver
solks/LDriver1Laser Driver PCB
- Size
- 102 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 28
- Pads
- 113
- Tracks, vias
- 159, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2022
- Updated
- 17 Feb 2022
Overview
LDriver is an open-source printed circuit board by solks, from the solks/LDriver repository on GitHub. It is a 2-layer board of 102 × 60 mm with 45 parts on 28 nets, routed with 159 tracks and 0 vias.
It is built around the AD620ANZ, L78L09ABU and 64WR2KLF, with the BD911, SB2100 and TIP42C among its other parts. Its parts include 14 resistors, 11 capacitors, 5 ICs, 3 diodes and 3 transistors.
Main components
6
AD620ANZ
DIP-8-18V~-2.3V、2.3V~18V -40℃~+85℃ 0.75V/us 1 1.3mA 1.5pA/℃ 100dB 15us 18mA 1MHz 1nA 300nV/℃ 30uV 36V 500pA 80dB 9nV/√Hz@1kHz DIP-8 Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation Amplifiers
L78L09ABU
SOT-89-3-40℃~+125℃@(Tj) 1 1.7V@(40mA) 100mA 30V 37dB@(120Hz) 6mA 70uV 9V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators64WR2KLF
插件12 250mW 2kΩ ±10% ±100ppm/℃ 插件 Potentiometers, Variable Resistors ROHSTT ElectronicsPotentiometers & Variable Resistors
BD911
TO-220C-65℃~+150℃ 1 NPN 100V 15A 250 3MHz 3V 500uA 5V 90W NPN Standalone TO-220C Bipolar (BJT) ROHSSPTECHBipolar (BJT)
SB2100
DO-152A、3A 60V、100V DO-15 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesTIP42C
TO-220-3L-55℃~+150℃ 1 PNP 1.5V 100V 2W 30 3MHz 400uA 5V 6A PNP TO-220-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W4.5mm_P5.00mm | C3, C5, C7, C10 |
| 4 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C4, C8, C9 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R13 |
| 2 | 249R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R10 |
| 2 | 64WR2KLF | SamacSys_Parts:64WR2KLF | VR1, VR2 |
| 2 | AD620ANZ | SamacSys_Parts:DIP794W56P254L959H533Q8N | IC1, IC2 |
| 1 | 0R | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R14 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 150R 1W | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R2 |
| 1 | 172448-0002 | SamacSys_Parts:1724480002 | J3 |
| 1 | 172448-0004 | SamacSys_Parts:1724480004 | J1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 1k4 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C11 |
| 1 | 249k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 2R5 15W | Resistor_THT:R_Axial_Power_L38.0mm_W9.0mm_P40.64mm | R12 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C6 |
| 1 | 511k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 5k1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 90136-1103 | SamacSys_Parts:SHDR3W65P0X254_1X3_1097X721X1110P | J2 |
| 1 | BD911 | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
| 1 | ICL8069 | Package_TO_SOT_THT:TO-92_Inline | D2 |
| 1 | L78L09 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | L79L09 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | LM329 | Package_TO_SOT_THT:TO-92_Inline | D1 |
| 1 | LM338 | digikey-footprints:TO-220-3 | U1 |
| 1 | SB2100 | Diode_THT:D_DO-15_P10.16mm_Horizontal | D3 |
| 1 | TIP42C | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
Questions
How big is the LDriver PCB?
It measures 102 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LDriver use?
45 parts, built around the AD620ANZ, L78L09ABU, 64WR2KLF and BD911. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LDriver KiCad files?
From the solks/LDriver repository on GitHub, at the commit this page was made from: the board is LDriver/LDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask solks before reusing the design.
Similar boards
- 2 layers74.2 × 87.1 mm
Nc1
nietamten/VoltageConverterForSolar
NCP1034 buck with regulated output voltage, output current, minimum input voltage
76 parts4 - 2 layers118.3 × 68 mm
Field eyes v2.before spreading
louismomo66/field-eyes_pcb
Open fieldeyesv2.kicadpro in KiCad 9. The whole circuit is one flat schematic (fieldeyesv2.kicadsch): all 168 parts are on a single page, in four framed sections.
168 parts - 2 layers214 × 204 mm
- 2 layers50 × 50 mm
- 2 layers61.1 × 95.5 mm
- 2 layers85.7 × 70 mm
- 2 layers151 × 131 mm
