
Rpi rm2 flexypin
solderparty/flexypin_adapters_hw
To learn more about FlexyPins, see the dedicated repo here: https://github.com/solderparty/flexypin

To learn more about FlexyPins, see the dedicated repo here: https://github.com/solderparty/flexypin
Rpi pico flexypin is an open-source printed circuit board by solderparty, from the solderparty/flexypin_adapters_hw repository on GitHub. It is a 2-layer board of 72.2 × 90 mm with 20 parts on 37 nets, routed with 964 tracks and 80 vias.
Its parts include 6 connectors, 1 IC and 1 switch. It belongs with the RP2040 boards of this library.

To learn more about FlexyPins, see the dedicated repo here: https://github.com/solderparty/flexypin
This repo contains a collection of open hardware designs for common modules that can be used with FlexyPins.












| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x17 | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_01x20 | FlexyPin:FlexyPin_1x20_P2.54mm | J1, J3 |
| 2 | LOGO | Symbols_Extra:SolderParty-New-Logo_3x2.5mm_SilkScreen | G***, G*** |
| 2 | LOGO | Symbols_Extra:SolderParty-New-Logo_7.5x6.4mm_SilkScreen | G***, G*** |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | Conn_01x03 | FlexyPin:FlexyPin_1x03_P2.54mm | J2 |
| 1 | Conn_Debug | Connector_PinHeader_1.27mm_Extra:PinHeader_2x05_P1.27mm_Vertical_SMD_IDC | J6 |
| 1 | G*** | kibuzzard-6227DBEE | kibuzzard-6227DBEE |
| 1 | G*** | kibuzzard-6227DBF8 | kibuzzard-6227DBF8 |
| 1 | RaspberryPi_Pico | Module_Extra:RaspberryPi_Pico | U1 |
| 1 | SW_RST | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
The 16 most common of 20 parts.

solderparty/flexypin_adapters_hw
To learn more about FlexyPins, see the dedicated repo here: https://github.com/solderparty/flexypin



atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
It measures 72.2 × 90 mm and has 2 copper layers, 1.6 mm thick.
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the solderparty/flexypin_adapters_hw repository on GitHub, at the commit this page was made from: the board is rpi_pico_flexypin/rpi_pico_flexypin.kicad_pcb and its schematic ESP-12_flexypin/ESP-12_flexypin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask solderparty before reusing the design.