Skip to the content
2 layers94 × 121.6 mmRGBtoHDMI CDTV v2, the printed circuit board in 3D

RGBtoHDMI CDTV v2

Size
94 × 121.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
103
Pads
315
Tracks, vias
693, 186
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 Apr 2022
Updated
10 Oct 2022

Overview

RGBtoHDMI CDTV v2 is an open-source printed circuit board by solarmon, from the solarmon/RGBtoHDMI-CDTV-v2 repository on GitHub. It is a 2-layer board of 94 × 121.6 mm with 27 parts on 103 nets, routed with 693 tracks and 186 vias.

Its parts include 3 capacitors, 3 connectors and 1 IC. It belongs with the FPGA and CPLD boards of this library.

README

README.md

Introduction

This is version 2 of the RGBtoHDMI CDTV solution.

Improvements over version one are:

  • Full sized HDMI port
  • DB9 mouse and joystick ports
  • JP15 toggle switch

This is an RGBtoHDMI solution is based on the original work by hoglet67 and IanSB:

hoglet67: https://github.com/hoglet67/RGBtoHDMI

IanSB: https://github.com/IanSB/RGBtoHDMI

The solution is based on the RGBtoHDMI CPLD based hardware design by LinuxJedi:

https://github.com/LinuxJedi/AmigaRGBtoHDMI

Special mention to c0pperdragon for the original RGBtoHDMI board solution for the Amiga:

https://github.com/c0pperdragon/Amiga-Digital-Video

Design Files

The design files are available for KiCAD v6.

RGBtoHDMI CDTV v2 (QFP)

This is the Xilinx XC9572XL QFP 44-pin package version.

This is the main RGBtoHDMI board, with daughter board, and face plate:

RGBtoHDMI CDTV v2

Note: Due to limitations of the 3D rendering in KiCAD, some of the colours and components are not accurate.

RGBtoHDMI CDTV v2 - Denise Breakout

This is the Denise adapter that is required to connect to the main board. It provides the digital RGB video and JP15 signals to the main board.

RGBtoHDMI CDTV v2 - Denise Breakout

RGBtoHDMI CDTV v2 - Mouse and Joystick Adapter

This is the mouse and joystick adapter required to connect to the DB9 ports on the main board:

RGBtoHDMI CDTV v2 - Mouse and Joystick Adapter

The adapter uses a 18-pin (1mm pitch) FFC flex cable. A 60cm long flex cable is ideally required. However, if only 30cm long flex cables are available then an FFC extender board can be used to join two of them together:

Wiki

Please see the wiki for further details:

RGBtoHDMI-CDTV-v2-Quick-Start-Guide

Parts

27
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.5mm_Pad_ViaH1, H2, H3, H4
3100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3
3Jumper_2_OpenConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1, BT2, BT3
24K7Resistor_SMD:R_Array_Convex_4x0603RN1, RN2
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalA1, P1
2Conn_01x18solarmon_library:FPC-SMD_X10B25U18TFFC1, FFC2
2DB9_Male_MountingHolesConnector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mmPORT1, PORT2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJP15
1Conn_01x20solarmon_library:XFCN_F0501-T-20-20T-RFPV20
1Conn_02x06_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_VerticalCN1
1Conn_02x15_Odd_Evensolarmon_library:CDTV_Video_Slot_30_pinCN10
1HDMI_AConnector_HDMI:HDMI_A_Kycon_KDMIX-SL1-NS-WS-B15_VerticalRightAngleCN2
1Raspberry_Pi_2_3Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalPi0
1SW_SPDTsolarmon_library:T8019L_T8020LBTS1
1XC9572XL-10VQ44C or XC9572XL-10VQG44CPackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1solarmon_logosolarmon_library:solarmon-logo-25milssolarmon1

More from solarmon/RGBtoHDMI-CDTV-v2

4

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the RGBtoHDMI CDTV v2 PCB?

It measures 94 × 121.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RGBtoHDMI CDTV v2 use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RGBtoHDMI CDTV v2 KiCad files?

From the solarmon/RGBtoHDMI-CDTV-v2 repository on GitHub, at the commit this page was made from: the board is RGBtoHDMI CDTV v2/RGBtoHDMI CDTV v2.kicad_pcb and its schematic RGBtoHDMI CDTV v2 - Denise Breakout/RGBtoHDMI CDTV v2 - Denise Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RGBtoHDMI CDTV v2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask solarmon before reusing the design.