
Nickgagnon programmable battery power saving board pcb programmable battery power saving board
oomlout/oomlout_oomp_project_bot_v_2

Simple PCB design to charge single 18650 cell at a set current.
Arduino dummy load pcb is an open-source printed circuit board by solarcaratuva, from the solarcaratuva/Batterycharger repository on GitHub. It is a 2-layer board of 209.6 × 109.2 mm with 9 parts on 6 nets, routed with 37 tracks and 2 vias.
It is built around the IPP45P03P4L-11-VB. Its parts include 2 capacitors, 2 resistors, 1 IC, 1 transistor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | 47k | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 50m | Resistors_SMD:R_2512_HandSoldering | R1 |
| 1 | Battery_Cell | Library:18650 | BATT1 |
| 1 | IPP45P03P4L-11 | TO_SOT_Packages_THT:TO-220-3_Vertical | Q1 |
| 1 | MCP73826 | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Wuerth-629105150521_CircularHoles | J1 |
The 8 most common of 9 parts.

oomlout/oomlout_oomp_project_bot_v_2



FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 209.6 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the IPP45P03P4L-11-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the solarcaratuva/Batterycharger repository on GitHub, at the commit this page was made from: the board is KiCad/arduino_dummy_load_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask solarcaratuva before reusing the design.