
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Hardware library for gauss meter
Gauss meter kicad is an open-source printed circuit board by sohamc1, from the sohamc1/gauss-meter-hardware repository on GitHub. It is a 2-layer board of 120 × 120 mm with 29 parts on 57 nets, routed with 222 tracks and 5 vias.
It is built around the LM258P. Its parts include 11 resistors and 5 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R | R_gauss_custom:R_gauss_custom | R1, R2, R3, R4, R5, R7, R9, R10, R11, R12, R13 |
| 6 | , , , , , | ||
| 4 | 1985823 | 1985823:PHOENIX_1985823 | HOLD_HDR1, NULL_HDR1, PWR_HDR1, SW3_HDR1 |
| 1 | 1727023 | 1727023:PHOENIX_1727023 | HALL_HDR1 |
| 1 | ESP32-DEVKITC-32D | ESP32-DEVKITC-32D:MODULE_ESP32-DEVKITC-32D | U3 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | PWR_LED1 |
| 1 | LM258P | LM258P:DIP794W45P254L959H508Q8 | U1 |
| 1 | LM358N_NOPB | LM358N_NOPB:DIP794W45P254L959H508Q8 | U2 |
| 1 | MTSW-104-22-L-S-390 | MTSW-104-22-L-S-390:SAMTEC_MTSW-104-22-L-S-390 | LCD_HDR1 |
| 1 | ~ | ads1115_custom:ads1115 | U4 |
| 1 | ~ | DUAL_BOOST_5_12:DUAL_BOOST_5_12 | U6 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 120 × 120 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the LM258P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sohamc1/gauss-meter-hardware repository on GitHub, at the commit this page was made from: the board is gauss_meter_kicad.kicad_pcb and its schematic gauss_meter_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sohamc1 before reusing the design.