Skip to the content
2 layers28.1 × 15 mmDb9, the printed circuit board in 3D

A second generation low-cost amateur HF software defined radio transceiver.

Size
28.1 × 15 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
12
Pads
54
Tracks, vias
131, 3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
24 Nov 2016
Updated
4 Nov 2026

Overview

Db9 is an open-source printed circuit board by softerhardware, from the softerhardware/Hermes-Lite2 repository on GitHub. It is a 2-layer board of 28.1 × 15 mm with 9 parts on 12 nets, routed with 131 tracks and 3 vias.

It is built around the BSS138. Its parts include 4 connectors, 2 resistors and 2 transistors. It belongs with the radio and wireless boards of this library.

Main components

1

README

README.md

Hermes-Lite 2.x

See the main Hermes-Lite Web Page for the latest links and details.

This is a work in progress to create a low-cost software defined amateur radio HF transceiver based on a broadband modem chip and the Hermes SDR project.

Parts

9
QtyValueFootprintReferences
3edge10HERMESLITE:edge10J1, J2, J4
210KHERMESLITE:SMD-0805R1, R2
2BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2
1DB9_MaleHERMESLITE:db9edgeJ3
1break10HERMESLITE:break10B1

More from softerhardware/Hermes-Lite2

6
  • 4 layers99.9 × 100 mmHermeslite, the printed circuit board in 3D

    Hermeslite

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    490 parts384
  • 4 layers100 × 49.9 mmN2adr, the printed circuit board in 3D

    N2adr

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    166 parts384
  • 2 layers106 × 55 mmEndcap, the printed circuit board in 3D

    Endcap

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    48 parts384
  • 2 layers21.9 × 51.7 mmIo jumper, the printed circuit board in 3D

    Io jumper

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    13 parts384
  • 2 layers17.1 × 15.4 mmPsfeedback, the printed circuit board in 3D

    Psfeedback

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    7 parts384
  • 2 layers18.4 × 12.5 mmSmallio, the printed circuit board in 3D

    Smallio

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    6 parts384

Similar boards

  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers21.6 × 52.3 mmPs2 pico hat, the printed circuit board in 3D

    Ps2 pico hat

    No0ne/ps2x2pico

    USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

    17 parts399MIT
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT

Questions

How big is the Db9 PCB?

It measures 28.1 × 15 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Db9 use?

9 parts, built around the BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Db9 KiCad files?

From the softerhardware/Hermes-Lite2 repository on GitHub, at the commit this page was made from: the board is hardware/companions/db9/db9.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Db9 design in my own project?

Its repository states no licence, so its author keeps all rights: ask softerhardware before reusing the design.