
Model KV Charger Board x9
sniporbob/Meshtastic_Model_KC_Housing_PCBs
PCB files for the Model KC meshtastic housing

PCB files for the Model KC meshtastic housing
Model KV Internal Contacts X12Panel is an open-source printed circuit board by sniporbob, from the sniporbob/Meshtastic_Model_KC_Housing_PCBs repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 83.2 × 57.4 mm with 72 parts on 2 nets, routed with 96 tracks and 0 vias.
PCB files for the Model KC meshtastic housing. There is an internal board that uses 2 target discs and gets epoxied into the base of the housing, and there's a charger board that holds a pair of pogo pins and allows soldering wires from a USB cable.
0.118" x 0.065" Target discs: part number 1618-4-57-15-00-00-03-0 from Mill-Max
Pogo Pins: P75-E2 from Amazon - https://www.amazon.com/dp/B099F1DRYJ - 16.54mm total length, 2.54mm compression, 1.02mm shaft diameter
Files in this repository include KiCad 8 project files and pre-generated gerber files. I milled these boards myself on a 3018 CNC mill so there are also panel layout KiCad files which are probably not useful to anyone.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Conn_01x01_Socket | TestPoint:TestPoint_Pad_D3.0mm | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J2, J2, J2, J2 +8 |
| 24 | Conn_01x01_Socket | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J4, J4, J4, J4 +8 |
| 24 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP2, TP2, TP2, TP2 +8 |

sniporbob/Meshtastic_Model_KC_Housing_PCBs
PCB files for the Model KC meshtastic housing

sniporbob/Meshtastic_Model_KC_Housing_PCBs
PCB files for the Model KC meshtastic housing

sniporbob/Meshtastic_Model_KC_Housing_PCBs
PCB files for the Model KC meshtastic housing

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset



jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
It measures 83.2 × 57.4 mm and has 2 copper layers, 1.6 mm thick.
72 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sniporbob/Meshtastic_Model_KC_Housing_PCBs repository on GitHub, at the commit this page was made from: the board is KiCad8/Model KV Internal Contacts/Model KV Internal Contacts-X12Panel.kicad_pcb and its schematic KiCad8/Model KV Charger Board/Model KV Charger Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).