2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers66 × 71 mm
EyeClock
Snetchy09/EyeClockEyeClock for Blare Hack club by Iyad/Snetch
- Size
- 66 × 71 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 20
- Pads
- 61
- Tracks, vias
- 68, 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Sep 2026
- Updated
- 17 Sep 2026
Overview
EyeClock is an open-source printed circuit board by Snetchy09, from the Snetchy09/EyeClock repository on GitHub. It is a 2-layer board of 66 × 71 mm with 14 parts on 20 nets, routed with 68 tracks and 1 via.
Its parts include 4 switches, 1 IC and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdhere is the EyeClock , it a clock that has time and eyes that move , Blare Hack Club
Challenges: i have never made a hardware project before , i have never used Kicad and onshape , the hardet part for me was making the CAD , due to poor 3d movement support in mu laptop , and the fact the clock is tilted and i took so long trying to fit the screen and the pcb inside the case
Inspiration: i took inspiration from a toy i had as a kid wich had small cool eyes that move and follow the user , tho the clock i made doesnt have camera nor sensors so the eyes movment is random
BOM: 1x Seeed XIAO ESP32 C3 1x ST7789 2.25 in TFT screen 1x buzzer 3x Cherry MX Switches 3x Blank DSA Keycaps 8x M3x16 Bolt
PCB:
Schematic:
Case parts:
case without the top part:
case without the bottom part:
C
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | XIAO-ESP32-C3-SMD | RF_Module:MCU_Seeed_ESP32C3 | U1 |
Questions
How big is the EyeClock PCB?
It measures 66 × 71 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EyeClock use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EyeClock KiCad files?
From the Snetchy09/EyeClock repository on GitHub, at the commit this page was made from: the board is PCB/eyeclock.kicad_pcb and its schematic PCB/eyeclock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EyeClock design in my own project?
Its repository states no licence, so its author keeps all rights: ask Snetchy09 before reusing the design.
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
