Skip to the content
2 layers45.7 × 61 mmWeather Station Interface, the printed circuit board in 3D

Weather Station Interface

smr547/ChainCounter

Develop a chain counter for a boat

Size
45.7 × 61 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
42
Pads
66
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
11 Jan 2024
Updated
23 Jan 2026

Overview

Weather Station Interface is an open-source printed circuit board by smr547, from the smr547/ChainCounter repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 45.7 × 61 mm with 8 parts on 42 nets.

Its parts include 4 connectors, 3 resistors and 1 capacitor. It belongs with the home automation and IoT and interfaces and adapters boards of this library.

README

README.md

ChainCounter

Develop a chain counter for a boat. The chain counter should be fully integrated with the ship's navigation system and offer features such as

  • Bright display at helm
  • Display:
    • length of chain out,
    • % of total length out,
    • current scope (chainOut/depth),
    • gypsy status (idle, up, down, freefall, bound and fault condition)
  • Anchor location: Home, dangling, dropping, lifting, free falling, on bottom, set
  • Anchor last known position (latitude, longitude and depth -- in case the anchor and chain are lost)
  • Automatic anchor watch activation and cancellation
  • Notifications ** Deploying anchor ** Anchor on bottom ** Anchor holding ** Lifting anchor ** Anchor weighed ** Anchor homed
  • Voice notification and warnings
  • Alarms and warnings: ** end of chain, ** insufficient scope, ** bound gypsy, ** anchor dragging, ** boat left anchor zone
  • All information available remotely (web page and mobile app)
  • Remote control of windlass (up / down buttons)
  • Parameters configurable via web page (gypsy circumference, chain length, alarm limits, anchor watch safety factor)
  • Integration via open RESTful interface

The Chain counter should be engineered using Open Source software and hardware to keep costs down and allow it to be easily integrated with other on-board systems.

Parameters reported

  • navigation.anchor.chainOut -- length of chain out
  • navigation.anchor.chainPercent -- chain out as a percentage of chain available
  • navigation.anchor.gypsyStatus -- idle, up, down, freefall, bound, fault(code)
  • navigation.anchor.deploymentStatus -- home, hanging, inWater, onBottom or unknown (depth data unavailable)
  • navigation.anchor.bottomPosition -- lat/long of anchor on bottom (if depth and GPS data unavailable)
  • navigation.anchor.scopeOut -- chain out as a factor of depth (if depth data unavailable)
  • navigation.anchor.gypsyCircumference -- circumference of gypsy *
  • navigation.anchor.chainLength -- length of chain installed *

(* indicates parameter configurable via web page or RESTful interface)

Events reported

  • chain stopped / moving
  • chain on bottom
  • chain weighed (off bottom)
  • chain home

Hardware Design

See the hardware directory for further information. We are using KiCad for hardware design. See the Schematic of current version.

Parts

8
QtyValueFootprintReferences
36P4CConnector_RJ:RJ14_Connfly_DS1133-S4_HorizontalJ1, J2, J3
24k7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
120nFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1
1Conn_02x20_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ4

More from smr547/ChainCounter

1
  • 2 layers25.9 × 19.6 mmRJ12 Breakout, the printed circuit board in 3D

    RJ12 Breakout

    smr547/ChainCounter

    Develop a chain counter for a boat

    2 partsApache-2.0

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the Weather Station Interface PCB?

It measures 45.7 × 61 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Weather Station Interface use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Weather Station Interface KiCad files?

From the smr547/ChainCounter repository on GitHub, at the commit this page was made from: the board is hardware/KiCad/Weather Station Interface/Weather Station Interface.kicad_pcb and its schematic hardware/KiCad/Weather Station Interface/RJ12_Breakout/Bus Bar/Bus Bar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Weather Station Interface design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).