Skip to the content
2 layers254.4 × 112.8 mmOsprangle, the printed circuit board in 3D

34-key unibody keyboard with pinky clusters

Size
254.4 × 112.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
81
Nets
58
Pads
381
Tracks, vias
468, 16
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Sep 2021
Updated
18 Oct 2026

Overview

Osprangle is an open-source printed circuit board by smores56, from the smores56/osprette repository on GitHub, published under the MIT licence. It is a 2-layer board of 254.4 × 112.8 mm with 81 parts on 58 nets, routed with 468 tracks and 16 vias.

Its parts include 36 switches, 34 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

The Osprette Family

The Osprangle, the newest Osprette

The Osprette is a 34-key unibody keyboard with pinky clusters, my variation on Brow's Balbuzard. All the revisions and variants share the same layout and the same firmware, so they live in one repo now, a folder per board:

  • Osprette (v1): the original. Pro-micro compatible, direct solder, with bluetooth support if you use a suitable controller
  • Osprette V2 (v2): second revision, nicer case, optional hotswap
  • Osprette V3 (v3): direct solder for people who want their switches to stay put
  • Osprette MX (mx): the original, but for MX switches
  • Osprangle (osprangle): hotswap, so you can try all the choc v2 switches
  • Roadkill (roadkill): a tiny one using Kailh's PG1316S butterfly switches

Each folder has its own README with ordering details and pictures.

Every board across both families is listed at smores56/keyboards.

Firmware

They all share a matrix, so they all run the same firmware: osprette in QMK (once this PR lands) and the osprette shield in ZMK. Roadkill doesn't have firmware yet. My personal keymaps live in qmk_userspace and zmk-config.

Building

Most of these boards use my smores.pretty KiCad library as a submodule, so clone with --recurse-submodules. The two oldest boards (Osprette and Osprette MX) instead pull in Foostan's kbd and Daprice's keyswitches.pretty.

The split half of the family is the Clog.

Parts

81
QtyValueFootprintReferences
341N4148footprints:smd-diodeD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +18
34SW_Pushfootprints:choc-v2-hotswapSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +18
2MountingHole_Padfootprints:single-pin-1, +1
1LOGOart:mining-front-art-mainG***
1LOGOart:logo-front-art-mainG***
1LOGOart:mining-front-art-highlightG***
1LOGOart:geode-cracking-front-art-mainG***
1LOGOart:logo-front-art-highlightG***
1LOGOart:geode-cracking-front-art-highlightG***
1LOGOart:sleeping-smores-back-art-highlightG***
1LOGOart:sleeping-smores-back-art-mainG***
1ProMicro_rfootprints:pro-microU1
1SW_Pushfootprints:reset-switch-angled-4pinSW35
1SW_SPDTfootprints:power-switchSW36

More from smores56/osprette

4
  • 2 layers266.6 × 102.4 mmOsprette, the printed circuit board in 3D

    Osprette

    smores56/osprette

    34-key unibody keyboard with pinky clusters

    87 parts63MIT
  • 2 layers253 × 110.9 mmOsprette v2, the printed circuit board in 3D

    Osprette v2

    smores56/osprette

    34-key unibody keyboard with pinky clusters

    87 parts63MIT
  • 2 layers272.2 × 107.7 mmOsprette mx, the printed circuit board in 3D

    Osprette mx

    smores56/osprette

    34-key unibody keyboard with pinky clusters

    85 parts63MIT
  • 2 layers247.3 × 113 mmOsprette v3, the printed circuit board in 3D

    Osprette v3

    smores56/osprette

    34-key unibody keyboard with pinky clusters

    76 parts63MIT

Similar boards

  • 2 layers162.9 × 178.9 mmAMPCD, the printed circuit board in 3D

    AMPCD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    81 parts431
  • 2 layers177.2 × 114.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    81 parts184
  • 2 layersEdrumulus, the printed circuit board in 3D

    Edrumulus

    corrados/edrumulus

    Open Source E-Drum Trigger Module

    81 parts163GPL-2.0
  • 2 layers64 × 55 mmZynthiandac bk2, the printed circuit board in 3D

    Zynthiandac bk2

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    81 parts156
  • 2 layersBD0027, the printed circuit board in 3D

    BD0027

    schlae/VapeRE

    Reverse engineered disposable v a p e boards

    81 parts136
  • 2 layers41.9 × 62.8 mmColumn, the printed circuit board in 3D

    Column

    AlaaSaadAbdo/Rommana

    A 30 key well powered by Xiao BLE

    81 parts105
  • 2 layers38.6 × 38.6 mmIotLedDriver, the printed circuit board in 3D

    IotLedDriver

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    81 parts94BSD-3-Clause
  • 2 layers98.5 × 45.4 mmIdawgz32, the printed circuit board in 3D

    Idawgz32

    ChrisChrisLoLo/idawgz32

    A full 32 key mechanical keyboard that can be made for only $5

    81 parts77GPL-3.0

Questions

How big is the Osprangle PCB?

It measures 254.4 × 112.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Osprangle use?

81 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Osprangle KiCad files?

From the smores56/osprette repository on GitHub, at the commit this page was made from: the board is osprangle/pcb/osprangle.kicad_pcb and its schematic mx/pcb/osprette-mx.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Osprangle design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).