

Relay module-5v half
PCB designs
- Size
- 40 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 13
- Pads
- 73
- Tracks, vias
- 110, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Mar 2024
- Updated
- 11 Sep 2026
Overview
Relay module-5v half is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 40 × 20 mm with 19 parts on 13 nets, routed with 110 tracks and 9 vias.
It is built around the 1N4148WS and BSS138. Its parts include 4 diodes, 4 connectors, 3 switches, 1 resistor and 1 transistor. It belongs with the home automation and IoT boards of this library.
Main components
21N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdPCB designs
A monorepository of my PCB designs created with KiCAD 8.
Layout and Workflow
Custom symbols and footprints are located in libraries, which
is shared between PCB projects using ${KIPRJMOD}.
Individual PCB projects (e.g. *.kicad_pro and friends) are located within
within pcb for active projects, or
pcb-archived for archived projects.
When a PCB is ordered from a project, fabrication outputs are created and
in the project's fab subdirectory and committed to the repository.
Setup
Ensure pipx is installed:
pip install pipxInstall scons:
pipx install sconsInstall KiCAD-related dependencies using the system site packages directory:
pipx install --system-site-packages kikit interactivehtmlbomBuild
To render all outputs, simply run scons.
To render outputs for a particular board, run scons -u within that board's
project subdirectory.
Licenses
Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).
- Hardware materials and designs are licensed under CERN Open Hardware License version 2.0 Permissive (CERN-OHL-P v2) (text). The version control history of this repository serves as the changes file.
- Software is licensed under the GNU General Public License v3.0 (GPL-3.0) (text)
- All documentation is licensed under Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA-4.0) (text)
The lcsc KiCAD symbols,
footprints, and 3D models
libraries were created using easyeda2kicad
(pypi), which are from LCSC. More info about
easyeda2kicad
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N4148WS | custom:D_SOD-323_HandSoldering_simple | D1, D3 |
| 2 | LED | custom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simple | LED0, LED1 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | BSS138 | custom:SOT-23_simple | Q1 |
| 1 | JST SH | connector:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J0 |
| 1 | JST XH/PH | custom:Conn_Combo_JST-1x03-XH_PH-THT_pad2gnd | J2 |
| 1 | LOGO | graphics:icon-power-1.5mm | G*** |
| 1 | LOGO | graphics:oshw-logo-5mm | G*** |
| 1 | P3.5 | custom:Conn_Combo_TerminalBlock_P3.5_JST-XH_PH_1x03 | J1 |
| 1 | Pin Headers | custom:PinHeader_1x03_P2.54mm_Vertical_simple_pad2gnd | J10 |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | SW_SPDT_MountingPin | lcsc:SW-SMD_3P-P1.50_L2.7-W6.6 | SW0 |
| 1 | Test Button | lcsc:SW-SMD_BZCN_TSA002A35XXX | SW1 |
The 16 most common of 19 parts.
More from smkent/pcb
12- 2 layers100 × 66 mm

- 2 layers82 × 40 mm

- 2 layers100 × 32 mm

- 2 layers40 × 40 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

- 2 layers69 × 20 mm

- 2 layers16 × 32 mm

- 2 layers110 × 44 mm

- 2 layers66 × 32 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

Similar boards
- 4 layers70 × 54 mm

- 2 layers53 × 53 mm

Hair electrolysis machine
zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
83 parts168CERN-OHL-P-2.0 - 4 layers315 × 147.2 mm

- 2 layers61.5 × 99.1 mm

Venta LW Controller
Alex9779/Venta-LW-Controller
PCB design and instructions to control a Venta LW airwasher with an ESP32
31 parts26 - 4 layers41.4 × 108 mm

- 2 layers20 × 50.2 mm

OBJEX DoorSensor v1.2
electronet-au/Smart-DoorWindow-sensor
Open source Smart door/window sensor. ESP32-C3 based with a custom power latch to obtain a deep sleep mode current of (30-60nA).
82 parts12CERN-OHL-W-2.0 - 8 layers38 × 38 mm

Kolibri v0.5
bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard
221 parts8GPL-3.0 - 2 layers98.8 × 55.1 mm

H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT
Questions
How big is the Relay module-5v half PCB?
It measures 40 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relay module-5v half use?
19 parts, built around the 1N4148WS and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relay module-5v half KiCad files?
From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb-archived/stackable1/relay-module-5v-half/relay-module-5v-half.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relay module-5v half design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).