

Relay module-5v
PCB designs
- Size
- 40.5 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 11
- Pads
- 37
- Tracks, vias
- 41, 4
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Mar 2024
- Updated
- 11 Sep 2026
Overview
Relay module-5v is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 40.5 × 26 mm with 18 parts on 11 nets, routed with 41 tracks and 4 vias.
It is built around the BSS138 and SS34. Its parts include 3 diodes, 3 connectors, 2 transistors and 1 switch. It belongs with the home automation and IoT boards of this library.
Main components
2README
README.mdPCB designs
A monorepository of my PCB designs created with KiCAD 8.
Layout and Workflow
Custom symbols and footprints are located in libraries, which
is shared between PCB projects using ${KIPRJMOD}.
Individual PCB projects (e.g. *.kicad_pro and friends) are located within
within pcb for active projects, or
pcb-archived for archived projects.
When a PCB is ordered from a project, fabrication outputs are created and
in the project's fab subdirectory and committed to the repository.
Setup
Ensure pipx is installed:
pip install pipxInstall scons:
pipx install sconsInstall KiCAD-related dependencies using the system site packages directory:
pipx install --system-site-packages kikit interactivehtmlbomBuild
To render all outputs, simply run scons.
To render outputs for a particular board, run scons -u within that board's
project subdirectory.
Licenses
Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).
- Hardware materials and designs are licensed under CERN Open Hardware License version 2.0 Permissive (CERN-OHL-P v2) (text). The version control history of this repository serves as the changes file.
- Software is licensed under the GNU General Public License v3.0 (GPL-3.0) (text)
- All documentation is licensed under Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA-4.0) (text)
The lcsc KiCAD symbols,
footprints, and 3D models
libraries were created using easyeda2kicad
(pypi), which are from LCSC. More info about
easyeda2kicad
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LED | custom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simple | LED1, LED2 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | Conn_01x02 | custom:PinHeader_1x02_P2.54mm_Vertical_simple | J3 |
| 1 | Conn_01x03 | custom:JST_XH_S3B-XH_1x03_P2.50mm_Horizontal_pad2gnd | J1 |
| 1 | LOGO | graphics:icon-power-2mm | G*** |
| 1 | LOGO | graphics:icon-check-mark-circle-2mm | G*** |
| 1 | LOGO | graphics:oshw-logo-3mm | G*** |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | SS34 | custom:D_SMA_simple | D1 |
| 1 | Screw_Terminal_01x03 | custom:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal_simple | J2 |
The 13 most common of 18 parts.
More from smkent/pcb
12- 2 layers100 × 66 mm

- 2 layers82 × 40 mm

- 2 layers100 × 32 mm

- 2 layers40 × 40 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

- 2 layers69 × 20 mm

- 2 layers16 × 32 mm

- 2 layers110 × 44 mm

- 2 layers66 × 32 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

Similar boards
- 4 layers95 × 95 mm

Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers60 × 40 mm

Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers38 × 56 mm

- 4 layers64 × 30 mm

- 2 layers98.8 × 55.1 mm

H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers86 × 136 mm

Open pocket
LakoMoor/open-pocket-gbc
Game Boy / Game Boy Color on the Sipeed Tang Nano 20K: HDMI, Pocket-style menu, ST7735 LCD, USB remote. Open-source FPGA toolchain only.
58 parts4GPL-3.0 - 4 layers89.8 × 64 mm

- 2 layers53.5 × 33 mm

Acw02 zb v1.1
Fabiancrg/acw02_zb
See the documentation files for advanced features, troubleshooting, and hardware details.
30 parts3
Questions
How big is the Relay module-5v PCB?
It measures 40.5 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relay module-5v use?
18 parts, built around the BSS138 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relay module-5v KiCad files?
From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb-archived/misc/relay-module-5v/relay-module-5v.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relay module-5v design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).