
Neopixel micro
PCB designs
- Size
- 13 × 13 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 13
- Pads
- 54
- Tracks, vias
- 78, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Mar 2024
- Updated
- 11 Sep 2026
Overview
Neopixel micro is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 13 × 13 mm with 20 parts on 13 nets, routed with 78 tracks and 8 vias.
It is built around the WS2812B-2020 and WS2812B. Its parts include 10 diodes, 4 connectors, 2 capacitors and 2 resistors. It belongs with the lEDs and displays boards of this library.
Main components
2WS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdPCB designs
A monorepository of my PCB designs created with KiCAD 8.
Layout and Workflow
Custom symbols and footprints are located in libraries, which
is shared between PCB projects using ${KIPRJMOD}.
Individual PCB projects (e.g. *.kicad_pro and friends) are located within
within pcb for active projects, or
pcb-archived for archived projects.
When a PCB is ordered from a project, fabrication outputs are created and
in the project's fab subdirectory and committed to the repository.
Setup
Ensure pipx is installed:
pip install pipxInstall scons:
pipx install sconsInstall KiCAD-related dependencies using the system site packages directory:
pipx install --system-site-packages kikit interactivehtmlbomBuild
To render all outputs, simply run scons.
To render outputs for a particular board, run scons -u within that board's
project subdirectory.
Licenses
Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).
- Hardware materials and designs are licensed under CERN Open Hardware License version 2.0 Permissive (CERN-OHL-P v2) (text). The version control history of this repository serves as the changes file.
- Software is licensed under the GNU General Public License v3.0 (GPL-3.0) (text)
- All documentation is licensed under Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA-4.0) (text)
The lcsc KiCAD symbols,
footprints, and 3D models
libraries were created using easyeda2kicad
(pypi), which are from LCSC. More info about
easyeda2kicad
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | WS2812B-2020 | discrete:LED_WS2812B-2020_PLCC4_2.0x2.0mm_HandSolder | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 10u | discrete:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x01 | custom:PinHeader_1x01_P2.54mm_simple | J3, J4 |
| 2 | Conn_01x02 | custom:PinHeader_1x02_P2.54mm_Vertical_simple | J1, J2 |
| 2 | LOGO | graphics:oshw-logo-1.5mm | G***, G*** |
| 2 | WS2812B | discrete:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2 |
More from smkent/pcb
12- 2 layers100 × 66 mm

- 2 layers82 × 40 mm

- 2 layers100 × 32 mm

- 2 layers40 × 40 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

- 2 layers69 × 20 mm

- 2 layers16 × 32 mm

- 2 layers110 × 44 mm

- 2 layers66 × 32 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

Similar boards
- 4 layers105 × 60 mm

Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 2 layers110.3 × 171.8 mm

- 2 layers301.2 × 140.8 mm

- 2 layers45.7 × 123.5 mm

MASTER ARM PANEL
Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.
43 parts14 - 4 layers16.9 × 119.4 mm

- 4 layers78 × 59 mm

- 2 layers240 × 240 mm

- 2 layers26 × 28 mm

Questions
How big is the Neopixel micro PCB?
It measures 13 × 13 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Neopixel micro use?
20 parts, built around the WS2812B-2020 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Neopixel micro KiCad files?
From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb/jigs/neopixel-micro/neopixel-micro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Neopixel micro design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).