Skip to the content
2 layers15.2 × 21.6 mmLed jig, the printed circuit board in 3D

Led jig

smkent/pcb

PCB designs

Size
15.2 × 21.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
24
Pads
48
Tracks, vias
40, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Mar 2024
Updated
11 Sep 2026

Overview

Led jig is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 15.2 × 21.6 mm with 12 parts on 24 nets, routed with 40 tracks and 0 vias.

Its parts include 8 diodes and 2 connectors.

README

README.md

PCB designs

A monorepository of my PCB designs created with KiCAD 8.

Layout and Workflow

Custom symbols and footprints are located in libraries, which is shared between PCB projects using ${KIPRJMOD}.

Individual PCB projects (e.g. *.kicad_pro and friends) are located within within pcb for active projects, or pcb-archived for archived projects.

When a PCB is ordered from a project, fabrication outputs are created and in the project's fab subdirectory and committed to the repository.

Setup

Ensure pipx is installed:

sh
pip install pipx

Install scons:

sh
pipx install scons

Install KiCAD-related dependencies using the system site packages directory:

sh
pipx install --system-site-packages kikit interactivehtmlbom

Build

To render all outputs, simply run scons.

To render outputs for a particular board, run scons -u within that board's project subdirectory.

Licenses

Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).

The lcsc KiCAD symbols, footprints, and 3D models libraries were created using easyeda2kicad (pypi), which are from LCSC. More info about easyeda2kicad

Parts

12
QtyValueFootprintReferences
8LEDcustom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simpleLED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8
2Conn_01x08custom:PinHeader_1x08_P2.54mm_Vertical_simpleJ1, J2
2R_Pack04_SplitResistor_SMD:R_Array_Convex_4x0603RN1, RN2

More from smkent/pcb

12
  • 2 layers100 × 66 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    160 partsCC-BY-SA-4.0
  • 2 layers82 × 40 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    106 partsCC-BY-SA-4.0
  • 2 layers100 × 32 mmUps-5v, the printed circuit board in 3D

    Ups-5v

    smkent/pcb

    PCB designs

    87 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    73 partsCC-BY-SA-4.0
  • 2 layers69 × 20 mmIp5209-ups, the printed circuit board in 3D

    Ip5209-ups

    smkent/pcb

    PCB designs

    67 partsCC-BY-SA-4.0
  • 2 layers16 × 32 mmReflow, the printed circuit board in 3D

    Reflow

    smkent/pcb

    PCB designs

    65 partsCC-BY-SA-4.0
  • 2 layers110 × 44 mmIp5306-ups, the printed circuit board in 3D

    Ip5306-ups

    smkent/pcb

    PCB designs

    64 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    63 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    57 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp cwww, the printed circuit board in 3D

    Esp cwww

    smkent/pcb

    PCB designs

    55 partsCC-BY-SA-4.0

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Led jig PCB?

It measures 15.2 × 21.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Led jig use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led jig KiCad files?

From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb/jigs/led-jig/led-jig.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led jig design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).