Skip to the content
2 layers42 × 12 mmEta6003, the printed circuit board in 3D

Eta6003

smkent/pcb

PCB designs

Size
42 × 12 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
19
Pads
110
Tracks, vias
163, 43
Pours
10
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Mar 2024
Updated
11 Sep 2026

Overview

Eta6003 is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 42 × 12 mm with 31 parts on 19 nets, routed with 163 tracks and 43 vias.

It is built around the ETA6003 and XB3306D. Its parts include 10 resistors, 5 capacitors, 4 connectors, 3 ICs and 3 diodes.

Main components

2

README

README.md

PCB designs

A monorepository of my PCB designs created with KiCAD 8.

Layout and Workflow

Custom symbols and footprints are located in libraries, which is shared between PCB projects using ${KIPRJMOD}.

Individual PCB projects (e.g. *.kicad_pro and friends) are located within within pcb for active projects, or pcb-archived for archived projects.

When a PCB is ordered from a project, fabrication outputs are created and in the project's fab subdirectory and committed to the repository.

Setup

Ensure pipx is installed:

sh
pip install pipx

Install scons:

sh
pipx install scons

Install KiCAD-related dependencies using the system site packages directory:

sh
pipx install --system-site-packages kikit interactivehtmlbom

Build

To render all outputs, simply run scons.

To render outputs for a particular board, run scons -u within that board's project subdirectory.

Licenses

Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).

The lcsc KiCAD symbols, footprints, and 3D models libraries were created using easyeda2kicad (pypi), which are from LCSC. More info about easyeda2kicad

Parts

31
QtyValueFootprintReferences
55K1Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R6, R7, R8, R11
210KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2Pin headerscustom:PinHeader_1x04_P2.54mm_Vertical_simple_pad3,4gndJ2, J4
10u1discrete:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4
1100RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR12
110udiscrete:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
11KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
11udiscrete:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
122udiscrete:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_wide-centerC10
122udiscrete:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
12KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
12u2discrete:L_1008_2520MetricL1
15K36Resistor_SMD:R_Array_Convex_2x0402RN1
1ETA6003package:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias_ETA6003U1
1HUSB237Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU3
1JST XH/PHcustom:Conn_Combo_JST-1x02-XH_PH-SMD-alt-pad2gndJ3
1LOGOgraphics:oshw-logo-2mmG***
1LOGOgraphics:oshw-logo-5mmG***
1LOGOgraphics:wa-state-heart-5mmG***
1Pinkcustom:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder_simpleLED1
1Redcustom:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder_simpleLED4
1SW_SPDT_MountingPinelectromechanical:SW_SPDT_PCM12SW1
1USB_C_Receptacle_PowerOnly_6Pconnector:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal_HandSolderJ1
1Whitecustom:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder_simpleLED2
1XB3306DPackage_TO_SOT_SMD:SOT-23U2

More from smkent/pcb

12
  • 2 layers100 × 66 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    160 partsCC-BY-SA-4.0
  • 2 layers82 × 40 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    106 partsCC-BY-SA-4.0
  • 2 layers100 × 32 mmUps-5v, the printed circuit board in 3D

    Ups-5v

    smkent/pcb

    PCB designs

    87 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    73 partsCC-BY-SA-4.0
  • 2 layers69 × 20 mmIp5209-ups, the printed circuit board in 3D

    Ip5209-ups

    smkent/pcb

    PCB designs

    67 partsCC-BY-SA-4.0
  • 2 layers16 × 32 mmReflow, the printed circuit board in 3D

    Reflow

    smkent/pcb

    PCB designs

    65 partsCC-BY-SA-4.0
  • 2 layers110 × 44 mmIp5306-ups, the printed circuit board in 3D

    Ip5306-ups

    smkent/pcb

    PCB designs

    64 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    63 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    57 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp cwww, the printed circuit board in 3D

    Esp cwww

    smkent/pcb

    PCB designs

    55 partsCC-BY-SA-4.0

Similar boards

  • 4 layers80 × 60 mmTinynode, the printed circuit board in 3D

    Tinynode

    Stary2001/my-mesh-nodes

    Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

    67 parts2CERN-OHL-P-2.0
  • 2 layers44.5 × 46.9 mmOSO SWAT B1-jig, the printed circuit board in 3D

    OSO SWAT B1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    31 parts2.1k
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    31 parts1kGPL-3.0
  • 2 layers191 × 98.5 mmMacroKeypad, the printed circuit board in 3D

    MacroKeypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers39 × 45.2 mmCH32V003F4P6-R0-1v1, the printed circuit board in 3D

    CH32V003F4P6-R0-1v1

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    31 parts599
  • 2 layers26.7 × 27.9 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    31 parts546MIT
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    31 parts447MIT
  • 2 layers77.2 × 69.8 mmCubesatsim solar, the printed circuit board in 3D

    Cubesatsim solar

    alanbjohnston/CubeSatSim

    CubeSatSim, the AMSAT CubeSat Simulator

    31 parts419GPL-3.0

Questions

How big is the Eta6003 PCB?

It measures 42 × 12 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Eta6003 use?

31 parts, built around the ETA6003 and XB3306D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Eta6003 KiCad files?

From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb/power/eta6003/eta6003.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Eta6003 design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).