smegg99/LoRaptor5LoRaptor is an open-source LoRa P2P mesh messaging platform with custom hardware, firmware and a chat app.
LoRaptor is an open-source printed circuit board by smegg99, from the smegg99/LoRaptor repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 40 mm with 40 parts on 77 nets, routed with 835 tracks and 136 vias.
It is built around the ESP32-S3-MINI-1-N8, LDI1117-3.3H and BAT60A, with the PESD5V0S1UB,115-JSM, MF-MSMF110-2 and SMF5.0A among its other parts. Its parts include 11 resistors, 6 capacitors, 6 diodes, 3 connectors and 1 IC. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Open-source LoRa mesh messaging without Wi-Fi, GSM, or Internet.
Custom hardware • Mesh firmware • Flutter chat app
LoRaptor is an open-source LoRa P2P mesh messaging platform built for off-grid communication. It combines a custom hardware node, embedded firmware, and a companion app so a paired phone or computer can send messages through a LoRa mesh network.
LoRaptor uses a compact custom PCB designed around the ESP32-S3-MINI-1 and RA-02 LoRa module, with USB-C, RGB status signaling, and a portable 3D-printed enclosure.
The firmware is built around LoRaMesher for mesh routing and RaptorCLI for device control over BLE or USB.
create connection -id "test" -k "secretKey123" -r [53052, 16888]
send -id "test" -m "Hello from LoRaptor"
flush -id "test"
help
RaptChat is the Flutter app for managing LoRaptor devices, creating connections, and sending messages over the mesh network.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R3, R4, R5, R6, R7, R8 |
| 4 | 100nF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C1, C4, C5, C6 |
| 4 | M2 | kicad-mounting-holes:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 10 | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R10, R11 |
| 2 | 100MHz | MPZ2012S102ATD25:BEADC2012X105N | FB1, FB2 |
| 2 | 1054440001 | 105444-0001:MOLEX_1054440001 | USB_C_PLUG1, USB_C_PORT1 |
| 2 | 1825910-6 | 1825910-6:SW_1825910-6-4 | BOOT1, RESET1 |
| 2 | 5.1k | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R1, R2 |
| 2 | BAT60A | PCM_Diode_SMD_AKL:D_SOD-323 | D3, D4 |
| 2 | PESD5V0S1UB.115 | PCM_Diode_SMD_AKL:D_SOD-523 | D1, D2 |
| 2 | PINHD_1x10_Male | kicad-headers-1.27mm:PinHeader_1x10_P1.27mm_Vertical | J1, J2 |
| 1 | 10uF | PCM_Capacitor_SMD_AKL:C_1206_3216Metric | C2 |
| 1 | 47uF | T491B476K010AT:CAPPM3528X210N | C3 |
| 1 | 68 | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R9 |
| 1 | ESP32-S3-MINI-1-N8 | ESP32-S3-MINI-1:XCVR_ESP32-S3-MINI-1-N8 | ESP1 |
| 1 | LDI1117-3.3H | PCM_Package_TO_SOT_SMD_AKL:SOT-223-3_TabPin2 | U1 |
| 1 | LTST-G563ZEGBW | LTST-G563ZEGBW:LED_LTST-G563ZEGBW | D6 |
| 1 | MF-MSMF110 | kicad-footprints-master:FUSER_MF-MSMF110 | F1 |
| 1 | PINHD_1x4_Male | kicad-headers-1.27mm:PinHeader_1x04_P1.27mm_Vertical | J3 |
| 1 | RA-02_LORA | RA-02:MODULE_RA-02_LORA | RA-1 |
| 1 | SMF5.0A | PCM_Diode_SMD_AKL:D_SOD-123F | D5 |
It measures 70 × 40 mm and has 2 copper layers, 0.8 mm thick.
40 parts, built around the ESP32-S3-MINI-1-N8, LDI1117-3.3H, BAT60A and PESD5V0S1UB,115-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the smegg99/LoRaptor repository on GitHub, at the commit this page was made from: the board is hardware/LoRaptor/LoRaptor.kicad_pcb and its schematic hardware/LoRaptor/LoRaptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
emnyeca/emiuet
The thirteen positions preserve familiar guitar-derived voicings without forcing octave shifts or omissions. Expressive controls are deliberately constrained so that performance remains predictable: Pitch Bend is…
freezweb/de.freezweb.heizungssteuerung
Dieses Verzeichnis enthaelt den KiCad-Startentwurf fuer die dezentrale Pumpengruppen-Platine:
ruibartsegura/ESP-Micro_drone
Development of a micro drone based on an ESP platform, adapted and extended through the integration of ROS. The project focuses on enhancing the system’s control, communication, and autonomy capabilities, enabling…