Skip to the content
2 layers88.5 × 43.5 mmVisualizer, the printed circuit board in 3D

Kicad files for my ledstrip project

Size
88.5 × 43.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
44
Pads
191
Tracks, vias
661, 31
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
3 May 2016
Updated
3 May 2016

Overview

Visualizer is an open-source printed circuit board by smasher816, from the smasher816/ledstrip_pcb repository on GitHub. It is a 2-layer board of 88.5 × 43.5 mm with 42 parts on 44 nets, routed with 661 tracks and 31 vias.

It is built around the ATMEGA328-PU and TC2050-IDC-NL. Its parts include 13 capacitors, 7 connectors, 6 transistors, 5 resistors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Ledstrip PCB

Kicad files for my ledstrip project.

Top

Top Image

Bottom

Bottom Image

Parts

42
QtyValueFootprintReferences
6N-MOSFETVisualizer:TO-220_NFET_HorizontalQ1, Q2, Q3, Q4, Q5, Q6
5100nFCapacitors_SMD:C_0805_HandSolderingC1, C6, C9, C10, C13
210KResistors_SMD:R_0805_HandSolderingR1, R5
210nFCapacitors_SMD:C_0805_HandSolderingC7, C11
210uFCapacitors_SMD:c_elec_4x4.5C4, C5
2200KResistors_SMD:R_0805_HandSolderingR3, R4
222pFCapacitors_SMD:C_0805_HandSolderingC2, C3
233pFCapacitors_SMD:C_0805_HandSolderingC8, C12
2AUDIO-JACKVisualizer:AUDIO_JACK-3.5mmJ1, J2
2CONN_01X04ab2_terminal_block:AB2_TB_04_RA_5MM_L-BLKP3, P4
2MSGEQ7Visualizer:DIP-8U1, U3
2POTPotentiometers:Potentiometer_WirePadsRV1, RV2
116MhzCrystals:Crystal_HC49-U_VerticalY1
1ATMEGA328PVisualizer:DIP-28IC1
1BARREL_JACKab2_power:AB2_PB_2MM_JACK_PTHCON2
1CONN_01X14ab2_header:AB2_HDR_M07-2VP5
1NCP1117ST50T3Gab2_sot:AB2_SOT223U2
1PWRLEDLEDs:LED-0805D1
1RResistors_SMD:R_0805_HandSolderingR2
1SPSTButtons_Switches_ThroughHole:SW_Micro_SPSTSW2
1SW_PUSHab2_input_devices:AB2_PB_MOM_6MM_PTH_BLKSW3
1SW_PUSHab2_input_devices:AB2_PB_MOM_5.2MM_SMDSW1
1TC2050-IDCTag-Connect:TC2050_BIGP1

Similar boards

  • 4 layers46.5 × 40 mmSpark Analyzer, the printed circuit board in 3D

    Spark Analyzer

    tooyipjee/Spark-Analyzer

    USB-PD ESP32 Power Analyzer

    84 parts171MIT
  • 4 layers145 × 57 mmX1-expander, the printed circuit board in 3D

    X1-expander

    jwise/x1-expander

    Expander board for Bambu Lab X1 Carbon

    150 parts50
  • 10 layers180 × 100 mmJetson agx thor baseboard, the printed circuit board in 3D

    Jetson agx thor baseboard

    antmicro/jetson-agx-thor-baseboard

    Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module

    1,213 parts48Apache-2.0
  • 2 layersEnlightened Otter, the printed circuit board in 3D

    Enlightened Otter

    Jana-Marie/Enlightened-Otter

    Enlighted-Otter is an Open-Source and OSHW work-light for hacker/maker events like the chaos communication congress, which can be screwed onto a club mate bottle.

    182 parts35GPL-3.0
  • 4 layers44.8 × 76 mmTiny scarab, the printed circuit board in 3D

    Tiny scarab

    Embeetle/tiny-scarab

    Tiny beetle board based on the CH32V003 10-cent chip.

    147 parts24MIT
  • 2 layers60 × 75 mmUBike, the printed circuit board in 3D

    UBike

    nategreco/uBike

    The Universal Bike Controller is an open-source project aimed at providing a drop-in replacement for the factory console on NordicTrack® S-series exercise bikes

    53 parts22GPL-3.0
  • 2 layers60 × 30 mmScoring table hardware, the printed circuit board in 3D

    Scoring table hardware

    GrappleRobotics/JMS

    Another alternative field management system for the FIRST Robotics Competition.

    30 parts18

Questions

How big is the Visualizer PCB?

It measures 88.5 × 43.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Visualizer use?

42 parts, built around the ATMEGA328-PU and TC2050-IDC-NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Visualizer KiCad files?

From the smasher816/ledstrip_pcb repository on GitHub, at the commit this page was made from: the board is visualizer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Visualizer design in my own project?

Its repository states no licence, so its author keeps all rights: ask smasher816 before reusing the design.