

Visualizer
Kicad files for my ledstrip project
- Size
- 88.5 × 43.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 44
- Pads
- 191
- Tracks, vias
- 661, 31
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 May 2016
- Updated
- 3 May 2016
Overview
Visualizer is an open-source printed circuit board by smasher816, from the smasher816/ledstrip_pcb repository on GitHub. It is a 2-layer board of 88.5 × 43.5 mm with 42 parts on 44 nets, routed with 661 tracks and 31 vias.
It is built around the ATMEGA328-PU and TC2050-IDC-NL. Its parts include 13 capacitors, 7 connectors, 6 transistors, 5 resistors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdLedstrip PCB
Kicad files for my ledstrip project.
Top

Bottom

Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | N-MOSFET | Visualizer:TO-220_NFET_Horizontal | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C1, C6, C9, C10, C13 |
| 2 | 10K | Resistors_SMD:R_0805_HandSoldering | R1, R5 |
| 2 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C7, C11 |
| 2 | 10uF | Capacitors_SMD:c_elec_4x4.5 | C4, C5 |
| 2 | 200K | Resistors_SMD:R_0805_HandSoldering | R3, R4 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C2, C3 |
| 2 | 33pF | Capacitors_SMD:C_0805_HandSoldering | C8, C12 |
| 2 | AUDIO-JACK | Visualizer:AUDIO_JACK-3.5mm | J1, J2 |
| 2 | CONN_01X04 | ab2_terminal_block:AB2_TB_04_RA_5MM_L-BLK | P3, P4 |
| 2 | MSGEQ7 | Visualizer:DIP-8 | U1, U3 |
| 2 | POT | Potentiometers:Potentiometer_WirePads | RV1, RV2 |
| 1 | 16Mhz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | ATMEGA328P | Visualizer:DIP-28 | IC1 |
| 1 | BARREL_JACK | ab2_power:AB2_PB_2MM_JACK_PTH | CON2 |
| 1 | CONN_01X14 | ab2_header:AB2_HDR_M07-2V | P5 |
| 1 | NCP1117ST50T3G | ab2_sot:AB2_SOT223 | U2 |
| 1 | PWRLED | LEDs:LED-0805 | D1 |
| 1 | R | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | SPST | Buttons_Switches_ThroughHole:SW_Micro_SPST | SW2 |
| 1 | SW_PUSH | ab2_input_devices:AB2_PB_MOM_6MM_PTH_BLK | SW3 |
| 1 | SW_PUSH | ab2_input_devices:AB2_PB_MOM_5.2MM_SMD | SW1 |
| 1 | TC2050-IDC | Tag-Connect:TC2050_BIG | P1 |
Similar boards
- 4 layers46.5 × 40 mm

- 4 layers145 × 57 mm

- 10 layers180 × 100 mm

Jetson agx thor baseboard
antmicro/jetson-agx-thor-baseboard
Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module
1,213 parts48Apache-2.0 - 2 layers

Enlightened Otter
Jana-Marie/Enlightened-Otter
Enlighted-Otter is an Open-Source and OSHW work-light for hacker/maker events like the chaos communication congress, which can be screwed onto a club mate bottle.
182 parts35GPL-3.0 - 4 layers44.8 × 76 mm

- 2 layers60 × 75 mm

UBike
nategreco/uBike
The Universal Bike Controller is an open-source project aimed at providing a drop-in replacement for the factory console on NordicTrack® S-series exercise bikes
53 parts22GPL-3.0 - 2 layers60 × 30 mm

Scoring table hardware
GrappleRobotics/JMS
Another alternative field management system for the FIRST Robotics Competition.
30 parts18 - 12 layers86.4 × 54.6 mm

Questions
How big is the Visualizer PCB?
It measures 88.5 × 43.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Visualizer use?
42 parts, built around the ATMEGA328-PU and TC2050-IDC-NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Visualizer KiCad files?
From the smasher816/ledstrip_pcb repository on GitHub, at the commit this page was made from: the board is visualizer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Visualizer design in my own project?
Its repository states no licence, so its author keeps all rights: ask smasher816 before reusing the design.