2 layers60 × 100 mm
PaLampa MoBo H00
Vedatori/PaLampa
Mechanickou část lze rozdělit na dvě hlavní části - spodní krabici a horní lampu. Vnější části krabice jsou vyřezány z překližky na laserové řezačce a obsahují zámkové západky.
80 parts4
2 layers150 × 90 mm
Backlight
SmallSharky/octopus-backlight- Size
- 150 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 46
- Pads
- 122
- Tracks, vias
- 94, 0
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Sep 2024
- Updated
- 4 Sep 2024
Overview
Backlight is an open-source printed circuit board by SmallSharky, from the SmallSharky/octopus-backlight repository on GitHub. It is a 2-layer board of 150 × 90 mm with 53 parts on 46 nets, routed with 94 tracks and 0 vias.
It is built around the SY7203DBC and SS24. Its parts include 41 diodes, 7 resistors, 2 capacitors, 1 IC and 1 connector.
Main components
2Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | LED | LED_SMD:LED_PLCC_2835 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +24 |
| 5 | 1R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 2.2uF 35V | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 2R | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 4.7uF 35V | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x03_MountingPin | rainwalker:XH254-0,5-3-2,5-V-SMD_1x03-1MP_P2.50mm_Vertical | J1 |
| 1 | L | Inductor_SMD:L_Chilisin_BMRx00060630 | L1 |
| 1 | SS24 | Diode_SMD:D_SMA | D41 |
| 1 | SY7203 | rainwalker:SY7203DBC-DFN-10-1EP_3x3mm_P0.5mm_EP1.75x2.7mm | U1 |
Questions
How big is the Backlight PCB?
It measures 150 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Backlight use?
53 parts, built around the SY7203DBC and SS24. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Backlight KiCad files?
From the SmallSharky/octopus-backlight repository on GitHub, at the commit this page was made from: the board is backlight.kicad_pcb and its schematic backlight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Backlight design in my own project?
Its repository states no licence, so its author keeps all rights: ask SmallSharky before reusing the design.
Similar boards
- 4 layers38 × 39 mm
CLN17-V1.5
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors
103 parts1.1k - 2 layers87.5 × 70 mm
010 Implementation
NewTec-GmbH/esp32-can-iot
A ESP32 based interface between CAN-bus and IoT environments.
70 parts51BSD-3-Clause - 4 layers44 × 44 mm
- 4 layers100 × 100 mm
Rpi pico printer board
jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico
224 parts42CERN-OHL-W-2.0 - 2 layers57 × 97 mm
MainCollar
plyalex/OpenFence
OpenFence is an open source GPS based digital livestock fencing system and web interface, aiming to reduce barriers of using cell grazing.
78 parts28GPL-3.0 - 2 layers68.5 × 53.3 mm
Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26 - 2 layers
