

Variable Gain Amplifier
PCB Schematics for all of SlugSat
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 11
- Pads
- 57
- Tracks, vias
- 63, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Oct 2019
- Updated
- 1 Jun 2022
Overview
Variable Gain Amplifier is an open-source printed circuit board by SlugSat, from the SlugSat/Schematics_PCBs repository on GitHub. It is a 2-layer board with 21 parts on 11 nets, routed with 63 tracks and 7 vias.
It is built around the LMH6505MA and LMH6624MF. Its parts include 8 capacitors, 6 resistors, 5 connectors and 2 ICs. It belongs with the audio and music boards of this library.
Main components
2LMH6505MA
SOIC-8-40℃~+85℃ 0.6uA 1 11mA 11mA 12.6V 1500V/us 150MHz 60mA 7V~12V 80dB Analog voltage gain、Built-in buffer Single-Ended VGA ±5V SOIC-8 Programmable / Variable Gain Amplifiers (PGA/VGA) ROHSTexas InstrumentsProgrammable / Variable Gain Amplifiers (PGA/VGA)LMH6624MF
SOT-23-5-2.5V~6V -40℃~+125℃ 1 1.5GHz 100mA 13.2V 16mA 25uA 2nA/℃ 400V/us 500uV 50nA 5V~12V 700nV/℃ 920pV/√Hz@1MHz 95dB SOT-23-5 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
README
README.mdSchematics_PCBs
PCB Schematics for the whole team
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 0.1uH | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C8 |
| 2 | 1000 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R7 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C4 |
| 2 | 29.4 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3 |
| 2 | 50 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | 6.8uH | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C7 |
| 2 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J1, J5 |
| 1 | LMH6505 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LMH6624 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
More from SlugSat/Schematics_PCBs
12- 4 layers90.2 × 95.9 mm

- 2 layers90.2 × 95.9 mm

- 2 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

- 2 layers109.2 × 45.7 mm

- 2 layers124.2 × 46.7 mm

- 2 layers

- 2 layers

- 2 layers210 × 85 mm

- 4 layers90.2 × 95.9 mm

- 2 layers63.5 × 29.8 mm

Similar boards
- 4 layers108.5 × 107.7 mm

Pid
bec5-group/pid-controller
Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…
428 parts - 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

Questions
What parts does the Variable Gain Amplifier use?
21 parts, built around the LMH6505MA and LMH6624MF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Variable Gain Amplifier KiCad files?
From the SlugSat/Schematics_PCBs repository on GitHub, at the commit this page was made from: the board is LT/Variable Gain Amplifier/Variable Gain Amplifier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Variable Gain Amplifier design in my own project?
Its repository states no licence, so its author keeps all rights: ask SlugSat before reusing the design.