Skip to the content
2 layers41 × 71.5 mmPyro Amplifier Board, the printed circuit board in 3D

Repository for the L2SI Laser MODS system energy meter diagnostic PCB.

Size
41 × 71.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
9
Pads
52
Tracks, vias
46, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 Sep 2020
Updated
13 Sep 2020

Overview

Pyro Amplifier Board is an open-source printed circuit board by slactjohnson, from the slactjohnson/l2si-mods-emeter-board repository on GitHub. It is a 2-layer board of 41 × 71.5 mm with 20 parts on 9 nets, routed with 46 tracks and 0 vias.

It is built around the OPA657U. Its parts include 10 capacitors, 2 resistors, 2 ICs and 2 connectors. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

l2si-mods-emeter-board

Repository for the L2SI Laser MODS system energy meter diagnostic PCB.

Parts

20
QtyValueFootprintReferences
40.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC3, C4, C10, C14
4MountingHoleThorLabs_CageSystem_MountHoles:ThorLabs_6mm_CageSystem_MountHoleH1, H2, H3, H4
20.01uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC5, C6
210uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2
11x03 Pin Header 2.54mmConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ1
13.3pFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC12
149.9Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4
1560pFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC8
15kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR2
1Conn_CoaxialConnector_Coaxial:SMA_Amphenol_132134-11_VerticalJ2
1Gentec_EmeterTO_Cans:TO-8_Can_8_LeadsU1
1OPA657Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3

Similar boards

  • 2 layers34 × 45 mm2stage tia, the printed circuit board in 3D

    2stage tia

    aewallin/Photodetector_2stage_OPA818

    Measurement data overlaid with TIASim predictions show a parasitic feedback-capacitance of ca 0.15-0.17 pF when no Cf (C126 in shematic) capacitor is installed.

    57 parts15
  • 2 layers49.5 × 36.8 mmSpikeLNA, the printed circuit board in 3D

    SpikeLNA

    cellularmitosis/SpikeLNA

    A Low Noise Amplifier for measuring switcher spikes.

    25 partsMIT
  • 2 layers41 × 71.5 mmPyro Amplifier Board, the printed circuit board in 3D

    Pyro Amplifier Board

    slactjohnson/l2si-mods-quadcell-board

    Repository for design files related to the L2SI MODS quad cell PCB.

    44 parts
  • 2 layers100 × 70 mmRed pitaya mux board, the printed circuit board in 3D

    Red pitaya mux board

    svenclawdbot-ai/acoustic-research

    Multi-frequency shear wave elastography research

    90 parts
  • 4 layers120 × 120 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    18 parts
  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT

Questions

How big is the Pyro Amplifier Board PCB?

It measures 41 × 71.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pyro Amplifier Board use?

20 parts, built around the OPA657U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pyro Amplifier Board KiCad files?

From the slactjohnson/l2si-mods-emeter-board repository on GitHub, at the commit this page was made from: the board is Pyro_Amplifier_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pyro Amplifier Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask slactjohnson before reusing the design.