
2stage tia
aewallin/Photodetector_2stage_OPA818
Measurement data overlaid with TIASim predictions show a parasitic feedback-capacitance of ca 0.15-0.17 pF when no Cf (C126 in shematic) capacitor is installed.

Repository for the L2SI Laser MODS system energy meter diagnostic PCB.
Pyro Amplifier Board is an open-source printed circuit board by slactjohnson, from the slactjohnson/l2si-mods-emeter-board repository on GitHub. It is a 2-layer board of 41 × 71.5 mm with 20 parts on 9 nets, routed with 46 tracks and 0 vias.
It is built around the OPA657U. Its parts include 10 capacitors, 2 resistors, 2 ICs and 2 connectors. It belongs with the audio and music boards of this library.
Repository for the L2SI Laser MODS system energy meter diagnostic PCB.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C10, C14 |
| 4 | MountingHole | ThorLabs_CageSystem_MountHoles:ThorLabs_6mm_CageSystem_MountHole | H1, H2, H3, H4 |
| 2 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 1 | 1x03 Pin Header 2.54mm | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | 3.3pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12 |
| 1 | 49.9 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 560pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132134-11_Vertical | J2 |
| 1 | Gentec_Emeter | TO_Cans:TO-8_Can_8_Leads | U1 |
| 1 | OPA657 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |

aewallin/Photodetector_2stage_OPA818
Measurement data overlaid with TIASim predictions show a parasitic feedback-capacitance of ca 0.15-0.17 pF when no Cf (C126 in shematic) capacitor is installed.


slactjohnson/l2si-mods-quadcell-board
Repository for design files related to the L2SI MODS quad cell PCB.

svenclawdbot-ai/acoustic-research
Multi-frequency shear wave elastography research

jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack



atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
It measures 41 × 71.5 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the OPA657U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the slactjohnson/l2si-mods-emeter-board repository on GitHub, at the commit this page was made from: the board is Pyro_Amplifier_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask slactjohnson before reusing the design.