Skip to the content
4 layers92 × 48 mmRemote flash probe, the printed circuit board in 3D

ESP32-S3 Wi-Fi remote STM32 flashing and logging probe. Tscircuit remains the declarative source for the schematic, exact footprints, BOM, and reviewed placement.

Size
92 × 48 mm
Copper layers
4
Thickness
1.6 mm
Parts
70
Nets
48
Pads
254
Tracks, vias
501, 104
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Jul 2026
Updated
3 Jul 2026

Overview

Remote flash probe is an open-source printed circuit board by skywalker0507, from the skywalker0507/remote-flash-probe-tscircuit repository on GitHub. It is a 4-layer board of 92 × 48 mm with 70 parts on 48 nets, routed with 501 tracks and 104 vias.

It is built around the ESP32-S3-WROOM-1-N16R8, USBLC6-2SC6 and 2N7002LT1G, with the AO3400A, AO3401A and LTST-C190KGKT among its other parts. Its parts include 22 resistors, 17 diodes, 9 capacitors, 5 ICs and 5 transistors. It belongs with the sensors and measurement boards and the ESP32 boards of this library.

Main components

7

README

README.md

ESP32-S3 Remote Flash Probe

ESP32-S3 Wi-Fi remote STM32 flashing and logging probe. Tscircuit remains the declarative source for the schematic, exact footprints, BOM, and reviewed placement. Phase 3 routing is maintained in the KiCad project under kicad/.

Target compatibility

The first hardware revision supports self-powered 3.3 V targets only: VTREF_IN must be within 3.0 V to 3.6 V. VTREF is a sense/reference input and never powers the target. TMUX1574 is a bidirectional switch, not a level translator; 1.8 V and 5 V targets are not supported.

Firmware must leave GPIO9 TARGET_ENABLE low until VTREF has passed an ADC threshold, hysteresis, and debounce check. Hardware Q4 inverts this high-active control. A target-powered TLV803EA26RDBZR supervisor and series AO3400A add an independent interlock: below 2.64 V, firmware cannot pull TMUX1574 /EN low.

The board uses a 92 mm × 48 mm long-form outline. USB-C enters from the left; the exact SM08B-GHS-TB(LF)(SN) JST-GH connector exits horizontally through the right edge.

J2 and J3 are alternate connectors for the same target nets. Use exactly one at a time; never connect two powered targets.

Commands

powershell
npm ci
npm run verify
npm run preview
npm run check:phase3
npm run fab:jlcpcb

npm run preview generates the schematic, local static viewer, and clean dist/index/pcb.svg / pcb.png (also copied as pcb-clean.*). The clean PCB view hides fabrication/package annotations, retains real designators and functional silkscreen, and automatically moves designators away from pads. The unfiltered renderer output is retained as pcb-debug.svg / pcb-debug.png, and raw Circuit JSON is preserved for footprint diagnostics.

Phase 3 routing state

The canonical tscircuit board intentionally remains routing-disabled so that a rebuild cannot replace controlled copper. The routed four-layer working board is kicad/remote-flash-probe.kicad_pcb:

  • F.Cu: components, USB/buck critical routes, and local signals.
  • In1.Cu: uninterrupted primary GND plane; no signal tracks.
  • In2.Cu: power distribution and selected slow signals.
  • B.Cu: ordinary/slow signals plus GND fill.

npm run check:phase3 runs KiCad DRC and verifies the layer policy, keepouts, target connector maps, GND stitching, critical locked routes, and absence of fabrication outputs. Five connectivity diagnostics are intentionally classified: two are KiCad zone-graph reports between the In1/B GND fills, which are joined by 50 through GND vias, and three describe the four mounting tabs of J1's one piece metal USB shield. There are no signal clearance, short, crossing, dangling, isolated-copper, or starved-thermal errors.

Phase 4 prototype package

The reviewed prototype board uses the JLCPCB JLC04161H-3313 four-layer stackup, ENIG, and epoxy-filled/capped via-in-pad for the exact USB4105 footprint. The F.Cu USB pair is specified as 90 ohm differential over the uninterrupted In1 GND plane.

npm run fab:jlcpcb regenerates and audits the bare-board upload archive at dist/fab/jlcpcb/remote-flash-probe-rev-a-gerbers.zip. It does not upload or order anything. See docs/jlcpcb-order-guide.md before requesting a quote.

Mechanical enclosure/STEP sign-off is intentionally deferred for the open-board prototype. Target-off leakage measurement is deferred until assembled hardware exists, but it remains a mandatory gate before unattended deployment.

See docs/phase-2-review.md for the current review, docs/phase-1-report.md for the original design record, docs/phase-3-routing.md for routing details, and dist/reports/bom.csv for the generated BOM.

For future projects, start with docs/pcb-development-playbook.md and copy the generic scripts described in pcb-toolkit/README.md.

A compact, tool-neutral handoff for a clean atopile comparison is available at handoff/atopile/README.md. It contains the exact hardware specification, structured pin/board data, BOM, acceptance gates, bootstrap prompt and comparison scorecard without the old autorouting history.

Parts

70
QtyValueFootprintReferences
14Dtscircuit:PESD3V3U1UL,315D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15
6100kΩtscircuit:RC0603FR-07100KLR12, R13, R14, R15, R21, R22
4tscircuit:hole_circle_holeDiameter3.2mmH1, H2, H3, H4
41kΩtscircuit:RC0603FR-071KLR10, R11, R19, R20
3100nFtscircuit:GRM188R71C104KA01DC1, C5, C8
310kΩtscircuit:RC0603FR-0710KLR1, R7, R18
32N7002LT1Gtscircuit:2N7002LT1GQ1, Q3, Q4
210uFtscircuit:GRM21BR61A106KE19LC2, C4
21MΩtscircuit:RC0603FR-071MLR16, R17
222uFtscircuit:GRM21BR60J226ME39LC6, C7
222Ωtscircuit:RC0603FR-0722RLR4, R5
247Ωtscircuit:RC0603FR-0747RLR8, R9
25.1kΩtscircuit:RC0603FR-075K1LR2, R3
10Ωtscircuit:RC0603JR-070RLR6
11uFtscircuit:GRM188R60J105KA01DC3
14.7nFtscircuit:GRM188R71H472KA01DC9
14.7µHtscircuit:inductorL1
1AO3400Atscircuit:AO3400AQ5
1AO3401Atscircuit:AO3401AQ2
1AP63203WU-7tscircuit:AP63203WU-7U3
1Dtscircuit:SMBJ5.0AD1
1ESP32-S3-WROOM-1-N16R8tscircuit:ESP32-S3-WROOM-1-N16R8U1
1F1tscircuit:fuseF1
1J1tscircuit:USB4105-GF-AJ1
1J2tscircuit:TSW-108-07-L-SJ2
1J3tscircuit:SM08B-GHS-TB(LF)(SN)J3
1J4tscircuit:TSW-107-07-L-SJ4
1LTST-C190KGKTtscircuit:LTST-C190KGKTLED1
1LTST-C190TBKTtscircuit:LTST-C190TBKTLED2
1SW1tscircuit:push_buttonSW1
1SW2tscircuit:push_buttonSW2
1TLV803EA26RDBZRtscircuit:TLV803EA26RDBZRU5
1TMUX1574PWRtscircuit:TMUX1574PWRU4
1USBLC6-2SC6tscircuit:USBLC6-2SC6U2

Similar boards

  • 4 layers44 × 80 mmRev a clearance fixes, the printed circuit board in 3D

    Rev a clearance fixes

    skywalker0507/pcb-project-template

    A reproducible, audit-first PCB workflow for Codex. Reviewed atopile source is the electrical authority, KiCad is the physical authority and independent validator, and KiCadRoutingTools (KRT) creates isolated routing…

    66 partsMIT
  • 4 layers100 × 100 mmEstacion Nivel, the printed circuit board in 3D

    Estacion Nivel

    HecVelaz/Proyecto-Mburica-

    Repositorio central del Proyecto Mburicao: Sistema IoT de monitoreo de nivel de cauces, modelos de predicción con IA y documentación científica

    61 parts3MIT
  • 4 layers40 × 40 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    benwys/SparrowHawk

    Open source flight controller for FPV drones. Includes two complete hardware designs (kicad) with production files. Will include custom firmware (bare-metal cpp). In progress :-)

    89 partsMIT
  • 4 layers86 × 145 mmCopper layers, the printed circuit board in 3D

    Copper layers

    JCastel358/Eltec406mca

    code for industrial automation process

    206 parts1
  • 4 layers97 × 105.5 mmSTARDRIVE SHIELD V1 0, the printed circuit board in 3D

    STARDRIVE SHIELD V1 0

    themarcolab/Stardrive-Shield

    With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.

    193 parts2
  • 4 layers100 × 50 mmTest, the printed circuit board in 3D

    Test

    aidanbrzezinski/test

    . ├─ 3D # STEP 3D model export ├─ Images # Pictures and renders │ ├─ kibotresources # External resources for KiBot │ ├─ colors # Color theme for KiCad │ ├─ fonts # Fonts used in the project │ ├─ scripts # External…

    211 partsMIT
  • 4 layers60 × 85 mmEsp32s3-camera, the printed circuit board in 3D

    Esp32s3-camera

    LCQIANN/esp32s3-camera

    ESP32-S3 camera board v1.2: OV2640 DVP camera, microSD, USB-C, LiPo, KiCad 10 project for JLCPCB PCBA

    64 parts
  • 4 layers120 × 50 mmIsolator, the printed circuit board in 3D

    Isolator

    alxgmpr/adum4165-isolator

    73 parts

Questions

How big is the Remote flash probe PCB?

It measures 92 × 48 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Remote flash probe use?

70 parts, built around the ESP32-S3-WROOM-1-N16R8, USBLC6-2SC6, 2N7002LT1G and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Remote flash probe KiCad files?

From the skywalker0507/remote-flash-probe-tscircuit repository on GitHub, at the commit this page was made from: the board is kicad/remote-flash-probe.kicad_pcb and its schematic kicad/remote-flash-probe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Remote flash probe design in my own project?

Its repository states no licence, so its author keeps all rights: ask skywalker0507 before reusing the design.