4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers
BottleBlink
Skrooter/BottleBlink1- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 58
- Pads
- 242
- Tracks, vias
- 292, 243
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 Jan 2021
- Updated
- 14 Apr 2023
Overview
BottleBlink is an open-source printed circuit board by Skrooter, from the Skrooter/BottleBlink repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 72 parts on 58 nets, routed with 292 tracks and 243 vias.
It is built around the WS2812B. Its parts include 29 capacitors, 29 diodes, 7 resistors, 6 switches and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdBottleBlink
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +13 |
| 29 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +13 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R7 |
| 6 | SW_DPST_x2 | Button_Switch_SMD:SW_SPST_EVQP0 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Arduino_Nano_v2.x | SkrooterFootprints:ArduinoNanoSMD | J1 |
Questions
What parts does the BottleBlink use?
72 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BottleBlink KiCad files?
From the Skrooter/BottleBlink repository on GitHub, at the commit this page was made from: the board is BottleBlink.kicad_pcb and its schematic BottleBlink.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BottleBlink design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
