
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Breakout board to test the MAX20499 low voltage buck regulator
MAX20499 breakout is an open-source printed circuit board by skot, from the skot/MAX20499_breakout repository on GitHub. It is a 2-layer board of 70 × 26.5 mm with 36 parts on 10 nets, routed with 85 tracks and 111 vias.
Its parts include 21 capacitors, 5 connectors, 4 resistors, 1 IC and 1 inductor. It belongs with the interfaces and adapters and power boards of this library.

I'm abandoning this board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 47uF | Capacitor_SMD:C_1206_3216Metric | C7, C8, C9, C10, C11, C12, C13, C14 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C15, C16 |
| 4 | 47uF | Capacitor_SMD:C_1210_3225Metric | C18, C19, C20, C21 |
| 4 | Conn_01x01 | low_voltage_reg:63862-1 | J1, J2, J4, J5 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | G*** | kibuzzard-62A80EF8 | kibuzzard-62A80EF8, kibuzzard-62A80EF8 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 2.2 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 470uF | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X | C17 |
| 1 | 70nH | low_voltage_reg:VLBU9664100LT-R07M | L1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | G*** | kibuzzard-62A80E9C | kibuzzard-62A80E9C |
| 1 | G*** | kibuzzard-62A80F52 | kibuzzard-62A80F52 |
| 1 | MAX20499 | low_voltage_reg:MAX20499 | U1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 70 × 26.5 mm and has 2 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the skot/MAX20499_breakout repository on GitHub, at the commit this page was made from: the board is max20499_breakout.kicad_pcb and its schematic max20499_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask skot before reusing the design.